Kundenbewertungen für VEVOR Vogelschutz für Solarmodule, 20,3 x 30,5 m, Taubenabwehr Solaranlagengitter mit 100 Aluminiumlegierung-Verschlüssen, Solarmodul-Schutz mit rostfreier PVC-Beschichtung, 12 mm Quadratgitter

This 'Critter' Guard is good quality and relatively easy to install. Just buy the kit with 100 fasteners in it as it is always better to have a few too many clips. Great price too.

Bought that for my solar panels due to a pigeon infestation. After installing it, 99% of all those birds were gone within days. Great product!!!

Ottima rete per proteggere i pannelli fotovoltaici dai volatili...facile installazione. Spedizione rapidissima

Si adatta facilmente al tetto con i coppi, permette di non alterare la forma del fotovoltaico, nessun buco necessario. Velocemente installabile, efficace

Het product is niet het probleem, dit is prima. Het gaas is van goede stevige kwaliteit en heeft een goede coating. Wij kwamen tijdens de montage van het gaas er pas achter dat alleen de zijkanten van onze panelen een omgezette rand hebben. We konden daardoor het gaas niet voor de boven-, en onderkanten gebruiken. Daardoor hadden we ruim voldoende aan 1 rol i.p.v. de 2 die we hebben gekocht. Er zitten voldoende haken en veerplaten bijgeleverd.

Great product that fitted our needs exactly. Product was easy to use and install and l would recommend

Solar bird was easy to install, unroll it around the panels and start at a corner. I would put black holding caps on about 10 to 12 holding pins and move from 2 or 3 panels. I was able to due 20 panels in a couple of hours.

Snelle levering. Stevig verpakt. Verwerkt makkelijk. Ik gebruik het om vogels uit houtpulp te houden.

Economica e facile da installare, servizio assistenza sempre disponibile. La rete è zincata e rivestita in pvc, i ganci in alluminio e le rondelle di blocco in acciaio inox. Grazie

Worth taking your time with this I fitted 2 x 100ft rolls on 22 panels in 3 separate arrays. The mesh is nice and stiff and sits nicely against the panels and roof. My roof is slates, so nice flat surface. Some people recommend cutting into lengths to make handling easier, but I used whole pieces for each sides of the panel arrays. Make a lengthways bend in the mesh to either sit flat or at 45 degrees against the tiles and stiffen it. You can also cut separate pieces for the corners to help reinforce and provide additional attachment points. I found it helpful to lock it also with some zip ties. Very fiddly, best to use some small electrical snips to cut and form the mesh to hook it together, but I’m very happy with the result. I was also able to find some rubber extrusion to fill the gaps between the panels to prevent any leaves, etc going down between and under the panels and get trapped behind the mesh. Should be fit and forget hopefully! The fixings work well, but the aluminium wire hooks are extremely soft and the washers can come loose if you don’t get it right first time. I wanted all metal fixings as I was worried that plastic clips would break or degrade in time with UV. I found bending the end of the hooks up whilst pulling on them against the washer gave a nice tight fixing and kept everything flat. Cut off the excess length of the hook with electrical snips afterwards.