Kundenbewertungen für VEVOR Vogelschutz für Solarmodule, 15,2 cm x 30,4 m, Taubenabwehr Solaranlagengitter mit 100 Edelstahl-Verschlüssen, Solarmodul-Schutz mit rostfreier PVC-Beschichtung, 12 mm Drahtrollengeflecht

Die günstigste und einfachste Lösung für mit Problem mit Tauben unter meiner PV Anlage, kann ich nur weiterempfehlen Einfach und schnell zu montieren und keine Taubennester mehr

Das Vogelschutzgitter ist ein Muss, wenn es um Taubenabwehr an PV-Modulen geht. Tauben gefällt es offenbar, im Zwischenraum zwischen Modul und Dach zu brüten. Ist die Option auf den Nestbau weg, sind die Tauben weg. Die Ware wurde schnell geliefert. Die Montage ist einfach und relativ schnell bewerkstelligt. Material und Verarbeitung lassen auf lange Haltbarkeit hoffen.

Prețul este foarte bun ,calitate ,comanda a ajuns ok .

Product came exactly as described. Some of the clips aren't quite as fancy as the others out there but they're all solid material and functioned as they were supposed to. Good product for the price compared to other places.

Ottimo prodotto

This product is the best, very good quality, easy to work with this product, 10 out of 10 !!!!!!!!!!!!

Snelle levering. Stevig verpakt. Verwerkt makkelijk. Ik gebruik het om vogels uit houtpulp te houden.

Molto veloce da istallare Buona qualità Bella resa estetica Consigliato

Great product, easy to install and so far its kept the birds out from under the panels. Should be used by all solar installers.

Worth taking your time with this I fitted 2 x 100ft rolls on 22 panels in 3 separate arrays. The mesh is nice and stiff and sits nicely against the panels and roof. My roof is slates, so nice flat surface. Some people recommend cutting into lengths to make handling easier, but I used whole pieces for each sides of the panel arrays. Make a lengthways bend in the mesh to either sit flat or at 45 degrees against the tiles and stiffen it. You can also cut separate pieces for the corners to help reinforce and provide additional attachment points. I found it helpful to lock it also with some zip ties. Very fiddly, best to use some small electrical snips to cut and form the mesh to hook it together, but I’m very happy with the result. I was also able to find some rubber extrusion to fill the gaps between the panels to prevent any leaves, etc going down between and under the panels and get trapped behind the mesh. Should be fit and forget hopefully! The fixings work well, but the aluminium wire hooks are extremely soft and the washers can come loose if you don’t get it right first time. I wanted all metal fixings as I was worried that plastic clips would break or degrade in time with UV. I found bending the end of the hooks up whilst pulling on them against the washer gave a nice tight fixing and kept everything flat. Cut off the excess length of the hook with electrical snips afterwards.