Kundenbewertungen für VEVOR Tischkreissäge 4400U/min, Tischsäge 1800W, 85mm bei 90° Querschnitt / 60mm bei 45° Schrägschnitt, Winkelanschlag -60˚/60˚, Ideal für Schneiden von Holz und DIY-Holzbearbeitungsprojekte

there is too much plastic on this saw, feels like it won't hold up or hold true to settings with all the plastic pieces

Machine imposible a c servir bruit asourdisant le voisinage pas trop d accord materiel de mauvaise qualite

Unfortunately this saw isn’t up to the standards. Used it once ,soft pine and immediately stopped working after the first cut which wasn’t completely done. I have products from this company and they work welll and hold up well. But unfortunately this product doesn't hold up .

machine en panne après 5 ml de coupe de contreplaqué de 18mm !!! les charbons sont complètement brûlés et le SAV est incapable de me dépanner. il m'a été suggéré d'aller faire mes emplettes de charbons sur Amazon (sic !) mais les dimensions requises ne sont pas dispos sur le marché des pièces détachées ! à fuir ! dommage...

Die Maschine lief insgesamt 30 Minuten. Geschnitten habe ich 20mm Eiche und Fichte. Dann blieb die Säge nach erneutem Einschalten plötzlich stehen und der Motor rauchte. Anstatt der gesetzlichen Gewährleistungspflicht nachzukommen eiert der Support seit Tagen rum und schlug zuletzt vor, die Maschine vor Ort! überprüfen zu lassen. Das war das erste und definitiv letzte Mal, dass ich bei Vevor etwas gekauft habe.

Ok, I fully understand a table saw under 250 is not going to be the best quality but this is not worth 100. It is not accurate at all. When you lock the blade in at zero degrees you can push on the full blade assembly and it moves over a couple degrees, not the blade, the whole assembly. It is mounted on plastic so that is why it gives. This will be fine for rough framing work e.g. like plywood ripping but ripping molding or finish work expect a lot of uneven edges. I will probably give it to one of my guys on the jobsite for rough work but do yourself a favor and buy something a little higher quality.

Ordered online and received two saws vice one. After several attempts I finally got customer service. Was told to keep saw and would be given $30. Finally after several hours I was told I would be refunded $197 and keep second saw. I gave up and gave to a friend. I had paid over $330 and didn’t need second saw. I will not deal with company again

Horrible piece of equipment. Plastic frame on a table saw Wrong size screws too short and missing hardware.

Après deux coupes sur une planche de 18 mm ..plus rien et ideur de cramé... verdict charbons moteur cramé. Et pour l'instant le retour du SAV VERVOR c'est "vérifiez l'état des brosses".... . J'espère que je vais réussir à me faire rembourser cette merde mais pour l'instant c'est pas gagné et je vous invite à passer votre chemin.... Même souci que pour Nicolas en janvier 2026..... n'hésitez pas à consulter les commentaires avant de vous faire berner

This saw is a huge disappointment. The quality is awful. I have found some Vevor products to be good, but after this I might never buy Vevor brand again. A nut and washer for one of the wheel bolts was missing. The exhaust hose for the vacuum port was missing. The square holes in the frame are too small for the square ands of the bolts (so they stick out). The blade does not go "all the way up" without tilting; it's a poor system. The instructions are incomplete and almost incomprehensible. Bottom-line: this is a poor, cheap imitation of a table saw, not a good value even at the low price.