Kundenbewertungen für VEVOR Schwerlastbarer Rasentraktor Kippanhänger mit 680 kg Tragkraft, Anhängevorrichtung mit Kippbarer Ladefläche, Anhänger mit abklappbaren Seitenwänden, Oranger ATV UTV Kippanhänger Anhänger

The loudest garden utility trailer you can buy. If your yard isn't perfectly flat, you'll for sure impress your neighbors with how loud you can get the steel pieces to clang against each other. Hearing protection is required.

It appears to be decently made for the price. As others have said, the instructions are clear for the most part, but there are a couple of confusing steps that could be clarified by having the illustrations identify which is front and back of the cart. The L-shaped brackets with the 4 small holes actually go on the back of the cart on the bottom corners...that held me up for a minute until I figured it out. That wasn't very clear in the instructions. There are a couple of minor issues like that, so you'll probably be unbolting things a few times. Definitely use a couple of 13mm sockets-don't try to use the included wrenches or you'll be spending a week putting it together.

The cart was easy to assembly. I moved 3 yards of small gravel for the base area for a new fire pit. It was easy to pull, but took some trial and error to figure backing up with it.

Overall this seems like a fairly solid trailer for my intended purpose; moving dirt, firewood, etc. It is being pulled behind a golf cart. Assembly wasn’t horrendous, however, the instructions really aren’t that clear in a couple of places in terms of the placement of certain parts. This is mainly the images, in fact I think a couple of them show placement of the rear support brackets that on the sides next to the tailgate being mounted to the front. But, assembly aside, which isn’t bad if you’ve got wrenches and a socket set, it’s pretty decent. The kit did come with a pair of smaller wrenches, but I opted to use better tools. I did opt to use a ball hitch instead of the pin system that it comes with. It’s easy enough to do, just know that the trailer tongue is 3 inches wide so that you get the right coupler. It’s light and easy enough to maneuver by hand, so no need to back up to it, and it certainly doesn’t need a jack unless you’ve just got an astronomical amount of weight in it. I’m satisfied with it as long as it holds up to my needs.

Mit ein wenig Geschick und einigem Nachdenken habe ich in ca. 4 Stunden gemütlich zusammengebaut. Leider war keinerlei Zusammenbauanleitung dabei und so mussten halt manchmal wieder Schrauben gelöst werden und dann anders verbaut werden. Das Preis - Leistungsverhältnis stimmt, das Gerät ist handlich und kann auch von Hand bewegt werden, die hervorstehenden Schrauben stören beim abladen, ich hab daher eine Siebdruckplatte angefertigt mit Ausfräsungen der Schraubköpfe, jetzt passt alles, insgesamt sehr zufrieden,

Assembly instructions were poor and do not start it without a battery powered drill for all the bolts and 2 batteries.

Great trailer for the price. Not the thickest of metals, but great for what I need. The build wasn't too bad, and 2 decent spanners are included although I used my socket set. The foot/hand operated tip release is a good idea.

This is an excellent sturdy trailer, great value for the money. The only reason I didn't give it 5 stars is the lack of clarity in the assembly instructions. I would recommend buying it but before starting assembly watch the YouTube video. If I had watched it before getting stuck late in the assembly I would have saved an hour and a half! The extra time was spent removing previously placed bolts to go on to the next step. Also would recommend not tightening all the bolts (there are 66) until it's all put together. One thing that helps in the assembly is that all the nuts and bolts are the same size and good quality.

Was missing 8 bolts,nuts,and washers And instructions skipped a step on putting it together.

Others have indicated difficult instructions. Watch the YouTube videos on how to put it together and pay attention to the detail in the drawings. Also try and read two to three steps ahead and its not that hard. What really helps is a drill equipped with a 13mm socket along with a 13mm. wrench. The cart itself is great for the price. I did replace the pneumatic tires with no flats because of flats. Minus one star for that. I will keep the original tires and may eventually try and find some better inner tubes.