Kundenbewertungen für VEVOR Zylinderbüchsen-Auszieher Stahl Zylinder Laufbuchsen Auszieher für 75-138mm Motor 7x Zugplatten ideal zum Entfernen von Zylinderlaufbuchsen für Dieselmotoren und Automobil-Verbrennungsmotoren

El producto es muy bueno , saqué los cilindros del motor sin ningún problema , para el taller es perfecto

Worked alright but it needed some cleaning up to work correctly. Apply some good high pressure grease to the main screw and thrust bearing. The thrust bearing was painted over so all the ball bearings were glued in place with paint. I removed the paint and used a pair of pliers to break the ball bearings free in the cage. Luckily the paint is very low quality to it comes off easily. Speaking of paint, it must have still been wet when it was packaged. The manual was resting on the main screw and became glued to it which I assume was because the paint was still tacky when they threw the manual in there.

Product was delivered on time and was exactly as they described,was happy by the it worked. Only thing was a little short for taking out the sleeves. But it worked with adding a spacer.

Used this on my Allis Chalmers I-40 to remove the cylinder liners. I had to remove some material from the pulling disc with a flappy wheel on my angle grinder to make it fit. Let's face it, if you need this tool to remove cylinder liners every day, than this is not for you. It's very cheaply built, the bearing on top is very low quality, you must grease it and crimp the bearing case to the bearings or they will fall out. Mine stayed together for removal of all 4 liners. The 2 support pipes are made of tin foil, but they work. I will probably only use this tool 1 more time in my life, and it is available for my friends to use, so they do not have to buy it. I gave this tool a good review, because it did what it was supposed to, and it did not break, "yet"! I have a pic of tool in use, but it would not let me load it?

Great tool. Did what it was made for. I would recommend it .,... ......................,............

Worked well you my have to sand/grind the edges smooth to fit the cylinder walls. The price was right for a one time use.

Puller works well, with the plates to suit the different size liners the flexible head allows ease of fitting down the liner. The friction bearing to provide assistance with the puller failed as it wasn't heavy duty enough to withstand the forces pulling a very tight liner out.

Good puller for the price comes with several different types sizes to accommodate different sleeves. Will work with a 1466 international. Beats building one from scrap.

Ich empfehle diese Sammlung von Autoreparatur - Ziehwerkzeugen sehr. Sie sind zuverlässig, einfach zu bedienen und sparen mir viel Zeit bei Reparaturen.

Fungerte pra til mitt bruk, men lageret og avstandsstykker var litt spille.