Kundenbewertungen für VEVOR Zylinderbüchsen-Auszieher Stahl Zylinder Laufbuchsen Auszieher für 75-138mm Motor 7x Zugplatten ideal zum Entfernen von Zylinderlaufbuchsen für Dieselmotoren und Automobil-Verbrennungsmotoren

Product was delivered on time and was exactly as they described,was happy by the it worked. Only thing was a little short for taking out the sleeves. But it worked with adding a spacer.

Used this on my Allis Chalmers I-40 to remove the cylinder liners. I had to remove some material from the pulling disc with a flappy wheel on my angle grinder to make it fit. Let's face it, if you need this tool to remove cylinder liners every day, than this is not for you. It's very cheaply built, the bearing on top is very low quality, you must grease it and crimp the bearing case to the bearings or they will fall out. Mine stayed together for removal of all 4 liners. The 2 support pipes are made of tin foil, but they work. I will probably only use this tool 1 more time in my life, and it is available for my friends to use, so they do not have to buy it. I gave this tool a good review, because it did what it was supposed to, and it did not break, "yet"! I have a pic of tool in use, but it would not let me load it?

Great tool. Did what it was made for. I would recommend it .,... ......................,............

Worked well you my have to sand/grind the edges smooth to fit the cylinder walls. The price was right for a one time use.

Puller works well, with the plates to suit the different size liners the flexible head allows ease of fitting down the liner. The friction bearing to provide assistance with the puller failed as it wasn't heavy duty enough to withstand the forces pulling a very tight liner out.

Good puller for the price comes with several different types sizes to accommodate different sleeves. Will work with a 1466 international. Beats building one from scrap.

Fungerte pra til mitt bruk, men lageret og avstandsstykker var litt spille.

Well made parts although the tubes are not as instructed, They do not attach to top bar as I instructed in hand book which made it very difficult to use I had to put cylinder head bolt in block to keep tube in position Not very easy to use really disappointed Have I got wrong top bar and tubes? Please advise

Les deux tubes qui se pose sur la culasse sont beaucoup trop fragile, au premier serrage ils finissent par s’écraser comme un bout de plastique. Déçu de mon achat !!!

Was not enough puller to pull liners from a JD 404 engines. The handles bent. I got three out with great effort. I sent the block off to the machine shop where they pulled the remainder with an OTC puller. Kinda junk.