Kundenbewertungen für VEVOR Whirlpool-Handlauf 88,9–144,8cm höhenverstellbar Spa-Geländer Whirlpool Aluminiumlegierung rostfrei korrosionsbeständig Pool Handlauf 272kg Tragfähigkeit Haltegriff Einstiegshilfe

Dieser Whirlpoolgriff sollte perfekt funktionieren, sobald ich Stufen für meinen Whirlpool kaufe. Der Griff ist hochwertig verarbeitet und sollte das Ein- und Aussteigen aus dem Whirlpool erleichtern.

This hot tub handle should work perfectly once I purchase steps for my hot tub. The handle is a good quality build and should work great to assist hot tub entry and exit.

You can adjust the height and the direction of the handle!! Quick and easy to use!!! Can't find a better quality any cheaper!!!

All went well and happy with the product. The nuts for the base Stanton are very tight and can easily cross thread and will not tighten fully. It does need some further stability to ensure safety of non wobble. Overall ok and probably the cheapest safety rail.

this has good adjustability and padding. Bear in mind there is some flex to it because it has a long vertical pipe with no upper stability. All stability is at the very bottom, plus the bottom mounting plate itself has a small amount of flex too. In general though, it's useful and serves the purpose without having to put holes in the spa cabinet.

Bonjour votre main courante est supper ; nous l'avons fixé au sol car impossible de la passer sous le spa trés utile pour entrer et sortir du spa Merci inutile d'ajouter une photo; l'image que vous donnez est identique à ce que nous avons !!! je recommande ce produit

The handrail consists of three tubes, braces and a base. It goes together easily with the furnished allen wrench, although the base tube needs more torque than that tool can deliver to seat firmly. Overall, it's a wonderful inexpensive solution. For $2 more it could have included a base of sufficient thickness to actually make the assembled unit truly sturdy and avoid the sway caused by a thin base. Hilariously, they spent the money instead on two rubber shims that do nothing but cast further aspersions on the suitability of the base. I use it every day and need it to enter/exit my hot tub. It works, but it's more excitement than it needed to be. The umbrella shown next to it in the picture has a heavier plate steel base and is rock solid. This base should have been the same.

Hilfreich zum Ein und Aussteigen.

goed product,handgreep wel wat dik.prettig met in en uitstappen bad en koude ton.2 stuks in gebruik.

This handrail is in serious need of improvement. The issue is with installation of the down tube. There are two aluminum bolts soldered on to the tube. The first time I tried to assemble this, one bolt stripped completely and the other broke right off. I wasn't using much force--but too much. Vevor shipped a replacement tube. I managed to very carefully tighten the first nut to the point it would compress the lock washer. The second nut was touch and go--I had to use a vice grip to try to apply inward pressure to the nut so it would tighten rather than stripping the threads. I managed to compress the lock washer slightly and didn't want to press my luck. The issue is not only the soft threads of the bolt--it is also that when the component is powder coated, the coating on the threads impedes the nut, causing it to seize and then strip the threads rather than tighten. I tried using a lubricant, which may have helped a little. I didn't have a thread cutter! But really threads need to be re-cut so that a nut can tighten. The use of a soft aluminum bolt here creates real problems. Other than that, it seems to be working as intended, and I hope that those attachment points will hold up over time.