Kundenbewertungen für VEVOR tragbare Propanschmiede Schmiedeofen mit 3 Brenner 1427 °C Messerherstellung, Hufschmiede, Sechseck mit großer Kapazität, Werkzeuge und Ausrüstung zum Schmieden von kaltgewalztem Stahl

I bought this as my first forge and it performs very well. There are considerations and care that must be taken when using it, but this should be expected of any forge at this price point. I coated the firebox using a stiffening spray and then 3-4 coats of refractory cement to isolate and trap the insulation fibers and retain the heat. It's possible to use the forge if you skip this step, but it becomes a respiratory hazard if you're working in an enclosed space and this is true of all mineral wool forges. I also added additional firebricks at the front and rear as doors to further isolate the heat. Again, you can get metal to forging temperature without these, but they will save a lot of fuel and keep your shop much cooler while allowing you to reach higher temperatures. All in all I had no problems with the regulator or burner and once you get it dialed in you can forge some pretty significant pieces in this little thing. I've worked 1/2" square stock and 3/8"x1" flat stock without issue - it will get there if you're patient and running at the right fuel/air ratio. I find I use about 1-2 lbs of propane per hour of forging.

Easy to assemble and use. Works great; heats and reheats metal quickly to temperature.

This is the second one of these I’ve bought. I went a little crazy with flux while learning to forge and it ate up my refractory cement. I just bought a new one Vice trying to repair the old one. Works well for smaller projects.

I use this forge in my shop don't know what I would do with out it.

Ça fait déjà un moment que j'utilise cette forge, je suis très satisfait ! J'ai pu réaliser mes premières créations, notamment des couteaux forgés grâce à celle ci. Elle est très intuitive, et chauffe très vite. Je recommande vivement !

My first forge, it worked very well for my beginner projects. I would highly reccomend it, although the one downside was it's size. it doesn't do well with anything other than blades and flat projects

Quick shipping, arrived on time, would buy again.

Conforme à la description, très content du produit

Va perfecto cumple con su cometido,lo he utilizado varias veces , lo que lo mejor es comprar ladrillo refractario y tapar la parte trasera y delantera para alcanzar más temperatura

Great