Kundenbewertungen für VEVOR Siebdruck-Set 2 Stk. Aluminium-Siebdruckrahmen, 50,8 x 61 cm Siebdruckrahmen mit 230 Netzstoff, Hochgespanntes Nylongewebe & Dichtungsband für T-Shirts, DIY-Druck usw.

These a SUPER LOW Tension screens! Thought I would give them a try. For me they will not work. While coating with a scoop I had good tension on the sides but it will lay down a super thick layer on the middle. Tried 110 and 160 mesh. Same problem. Just my experience tho.

I do not recommend these screens for an experienced screen printer. The screens are too thin, the mesh is adhered to the screen with tape, the tension is very weak. I do not recommend these screens.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

Not sure why there was blackout tape on the frame. It was taped all along the edges. Water was getting trapped inside when I did the initial wash & degrease. Measure the center point at the top and bottom of the frame and they weren't aligning. Use a t-square ruler and it was way off which made it hard to align artwork. This is the 2nd product I have bought from this company that I have had issue. I will no longer buy anything here. The quality sucks.

The tension is way too low to get a good print, not recommended for any serious work.

These screens are advertised as high tension, but that is not the case at all. They are some of the lowest tension screens I've ever used, and I'm always out of registration when I use them, there's no way to print more than one pass using these screens. You're much better off spending more on nice frames, because the money you'll spend on ruined t-shirts will quickly add up when you use these cheap frames.

the screens are very loose and will NOT work on any Automatic press. they will not keep registration due to the fact that the screen is very loose. frames are small and NOT strong. I sent many pictures to tech support to try and get a refund but they refused to send me my money back because shipping was to high to send screens back, they refunded half my money and I through the screens in the trash where they belong NEVER BUY THESE if you want quality prints

I won't order these again. These couldn't be much worse. There is no way I'm putting these screens in the exposure unit. The corners and edges are all quite sharp, just asking to put a hole in the neoprene of the vacuum system. The edges are held down with foil tape? And a while roll of foil tape in the hox, what's that for. I think they are crappy, I guess I'm used to quality equipment.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

I wish I could, I really did. I wish there where no problemes for cheaper tools.. but everything had its price. And if its to good to be true , it is…