Kundenbewertungen für VEVOR Schweißdrehtisch 20 W Schweißpositionierer 1-12 U/min Manipulator 10 kg(Horizontal)/5 kg(vertikal) Drehtisch 0–90° Neigungswinkel K01-63 Dreibackenfutter zum Schneiden, Schleifen, Montieren

Very handy for tig welding, speed control is great, the chuck is small but works great for small cylinders..would recommend.

Purchased one of these for a welder in our shop (who requested it) to expedite welding nuts to steel plates. I inquired regarding current rating prior to purchase and was told the ground brush was rated for 80 amps. I was concerned it may be marginal for our use but for the price figured I would give it a try. I've spot checked with our welder since who said he has used it in the 110amp range with no issues. I will admit I was originally a bit of a skeptic figuring it was going to be cheap junk and not hold up but so far it's held up quite well and saves our welder a lot of time.

Glad I finally bought this thing! Great way to practice my welds on piping so i can work on a few exhaust and intercooler piping.

What a game changer. I regularly MIG weld short steel tubes to small plates, and this little beauty allows me to do perfect 6CFWs. 10/10.

Stands. Are. Great quality only complaint is the. Chuck on the. Positioner is. Weak definitely need to upgrade that and the. Ground should be a lot. Thicker and located on the base of the positioner rather than located. Near the. Motor but over all great products

Preis und Leistung passt! Für meine Anwendung im Handwerk völlig ausreichend. Habe mir nen anderen Massepunkt gebaut, da der verbaute zu schnell heiß wird aber das ist Jammern auf hohen Nivoue.

Zeker Aanrader en snelle levering. Doet wat er verwacht word, afwerking kan beter. Prijs kwaliteit topper.

I bought this version of the 3 positioners for one reason. It will run slow enough to allow both Mig and Tig welding operations. The others, as others have said are OK for Mig but too quick for Tig. This model has a different motor/gearbox arrangement than the other 2. Testing today showed the gearing is slower than the specs say. My testing over 1 minute duration, with the adjuster knob just above zero and the time on 1 minute showed the turn table had only rotated approximately 0.2 RPM measured at the Platten edge. I have tested the mig function by welding together pie cut sections in to a 90 degree bend. This required rotation for 47 seconds to complete the weld on 32mm ERW tubing. Testing for Tig use is ongoing, but for the same size tubing. 38 X 1.6 wall. My initial estimate of rotation speed is 1 min and 10 seconds for one rotation. Easily within reach as the adjuster is only about 1/3 open.. The unit was delivered within the timeline and was well packaged. Assembly was easy. To be constructively critical, the mig stand is a blessing but really needs some more substantial tightening arrangements The wingnuts are too small to lock things in place. Having said that, the price whilst a significant jump from the 30kg version, does include this amazing adjustable arm wrest/mig attachment. Get the setup right and you almost have a robotic welder. I am thoroughly impressed with this product, representing great value for money. I did have a small issue with one of the relays in the control box. Vevor we're all over the issue and had a resolution in a few days. A replacement relay is on its way. After sales service is the best I have been involved with. Well done. For the doubters, I bought this myself, I get no kick back from vevor. I am a retired maintenance worker from the oil and gas industry. Just trying to learn Mig/Tig as a hobby. Trying to manufacture exhausts in stainless steel.

Put to use and was really easy to use and improved the weld control. So much so we bought 2 x 50kg units recently as well.

Kuvaksen mukainen Hyvin pakattu oli puulaatikossa kaIkki osat mitkä luvattu mukana Rahtiin meni se ylimääräinen 30 no olihan laatikko painava lähes 50kg Käyttötestit seuraa voi olla että joutuu hdastamaan pyöritystä mutta kokeillessa sai sen pyörimään niin hitaasti että juuri eroitti liikkeen jaksaako tuo sitten vääntää kun tulee kuormaa kappale pystöasennossa kyllä mutta miten käy kun kallistaa Jää nähtäväksi