Kundenbewertungen für VEVOR Schaufelzahnstange, 1,8m Hochleistungs-Traktorschaufel, 9-Zahn-Schiene für Lader, Traktor, Kompaktlader, 2000kg Tragkraft, Anschraubdesign, für effiziente Bodenausgrabung und Schaufelschutz

Seems to be heavy duty, works well on my driveway I dug down 12”. My only complaint is that they don’t make any attachments that are 84” wide so I had to buy 2 and cut one. 11k pound skidsteer behind the bucket and no crooked teeth yet.

Built solid, well designed, and easy to install. It allows me to dig slowly in hard soil where the bucket alone could not.

Bolts on well on a 2025R bucket and sturdy. Able to dig into dirt and mulch much easier than the smooth edge.

I've used and abused these. No issue with them falling off. Just get them good and tight. Perfect fit for my bucket.

I decided to weld it to the bucket and this monster really performs. It is well built and in doings so was able to take a big load off of the tractor by simply plucking trees and brush out of our grove. reduced time by 60 70 percent vs.. a smooth blade,

The tooth bar is excellent quality, very heavy duty and works great on my utility tractor. I have used it alot this past summer and has held up great. I did not drill the bucket fpr the bolts but just ised the set screws and it has not moved at all. If you need a tooth bar, buy it!

I was very impressed with quality and ease of use. I have a JD 1025r and the bar fit perfectly. The teeth are the rock teeth style and seem to be tough enough, not sure where to buy replacements. The bar comes with bolts if you want to bolt it on but I preferred using the allen screws that are in each tooth shank for easy on and off.

Great product and affordable. I have a mid-sized tractor and trying to dig and level parts of my yard was nearly impossible due to how hard the ground is. Added these teeth has made the difference!

heavy duty bucket attachment, Fit perfectly on my JD 1023e. Bucket will now remove turf and light brush. First job it tackled was pulling poison Ivy roots, worked great. Attached easily with an allen wrench.

I have an older skid steer with a bucket that never had teeth on it. After a lot of searching I found these bolt on teeth. They are well constructed, and did the job after I figured out what to do with them. And here it the reason why I took off one star for ease of use: The documentation. Yikes. Let's not mince our words on who is buying something like this from Vevor: People who are not deeply into the world of heavy equipment. People like myself may need a very straightforward explanation on how something like this *should* be attached to your bucket. Of course, once I figured it out, it is obvious. However, the following bit of verbiage could have saved me a bit of figuring time. "These teeth can be attached one of two ways. By tightening down the hex key set screws you can attach it temporarily. However, if you would like to have a more permanent attachement, drill holes in the blade and use the included bolts" There we go. When written out, it is obvious. Otherwise, the quality seems quite nice for a generic add on attachment, and I feel I will get a lot of use of it. A recommendation for you is if you are going to use the hex key set screws, I would recommend drilling very shallow partial holes where the keys will seat in your blade. This will prevent them from sliding off during something that pulls back.