Kundenbewertungen für VEVOR Palettengabel 1490 x 70 x 230 mm Gabelträger 907 kg Tragfähigkeit Gabelzinken 149 cm Gesamtlänge mit 109,2 cm-Gabelblatt Gabelstapler 495-915 mm

Decent set of forks. If you use them for their intended purpose, they work just fine. They are a bit of a hassle to set up, but that's to be expected for any set of bucket forks.

The quality of the forks, the hardware, fit and finish are excellent and the price and service made this purchase that much better. Terrific experience.

Worked as advertised Saved me a lot of hand loading and unloading of landscaping materials Easy on and easy off I couldn't see them through my bucket so I had to have a spotter to get the job done

I've got many trees down on the property. Your pallet forks are a super time saver. I easily installed them on my 37HP John Deere tractor bucket. I can now slide the forks under, down trees, lift them up over the trailer, and keep cutting perfect sized firewood. Not sure if I'll ever used them for pallets. : ) Where price, and quality intersect, there is value. Even used forks cost more, and would have been less convenient. Thanks very much!

Really looks well built and strong. Unfortunately box was torn and missing two large "L" bolts and two wing nut bolts I did contact customer about it.

These pallet forks are the lowest price I have seen and are even significantly less than secondhand pallet forks so they're ideal for occasional use. It's a basic piece of kit and providing the welds are checked and okay there's little to go wrong. My only niggle is the pins for attaching the lower link arms. These would just wiggle about and would risk causing problems but its a simple job to replace them with pins bolted into the pallet fork frame.

Completely satisfied. I use the 3-point mounted pallet forks for tons of stuff around the property and even to unload lawn and garden tractors from the bed of my truck. You can't quite see the forks in this image but they are under the ramps which rest on the truck bed. Roll the tractor seamlessly from the truck bed onto the ramps that are secured to the pallet forks. Then just raise the hitch forks up and go. I also use them to take heavy trash bins to the curb and with a carrier bin to move lots of stuff around with the forks. Highly recommend especially at this price.

This is a great and versatile product we use on our little farm nearly every day. We moved hay bales, bee hives, logs for the mill, toolboxes, and pallets full of saplings without any issues. It's quick to adjust the width and simple to install and remove. We're very grateful to have this tool.

In all fairness, I reluctantly ordered these fold down 3-point forks to move pallets of lumber and set average logs on the mill. Loader forks were out of my price range at this time. I never intended to use them for extreme lifting, but of course, that's what I needed when they arrived, (two packages, a week apart) Coming off a two week bad spell with a tweaked back, I needed to get a large log onto the mill. Advertising listed them at 2200 lb rated. I put them on the tractor (1986 Ford 38HP) and set them down next to this particular log, then rolled the log onto the forks and shortened the top link to keep it in place.When I lifted the 3-pt the tractor grunted some but it lifted, so I backed up to the mill and set it on the rails... Done, every body can relax again. Turns out the my Log Weight Pro app says that log weighed 2780 lbs! [25" x 13' 8" Eastern Hemlock... look it up] I DO NOT recommend anyone else over load any equipment, and had I looked up the weight beforehand I would not have challenged fate. No cracks, bends, or any signs of my abuse so this one gets 5 stars. Sidenote: I will be adding 6" chain locks to keep them upright when not in use. [Danger] I'll be recoating them with a quality bed liner in spring. But nobody will cut the parts out (so you can weld them) for the price. Fold up forks, carry-all, round bales, slabs, log loader on a ground level sawmill.

Preis Leistung passt. Bin zufrieden mit der Ware.