Kundenbewertungen für VEVOR Palettengabel 1490x100x230mm Gabelträger 1814kg Tragfähigkeit Gabelzinken 149cm Gesamtlänge mit 109,2cm-Gabelblatt Gabelstapler 495-915mm Einstellbar Gabelstaplerzinken Frontlader Palettenrahmen

VEVOR palletvorken vorkenbord 1t Palletvorken Tanden 3-punts hefinrichting Heavy Duty Bijzonder goed afgewerkt en stevig uiterst tevreden.

worked as intended. not sure id attempt using them at 2000lbs, but maybe. having a bracket to tie them together would be an asset

Fit well to tractor bucket. Only issue was one of the clamping nuts was loose on the clamp bolt. Work well otherwise.

As an Engineer I am critical of things, but here is a honest review of this product. It works and functions, I would not try to lift 2000 lbs with this, the material is simply not there, nor is the footprint on the tractor bucket to support such a load. Most tractor buckets are simply not designed to handle that load within the small space that the forks are in contact with the bucket itself. I would image it would damage or at least bend the bucket. Don't get it wrong for moving around stuff that is light weight but more than 2 people can handle this is a easy product to utilize. For Design purposes, the threaded attachment needs to be fine thread instead of coarse thread and it would help to have a better base on the securing "washer/nut"(it tends to walk around while either tightening it or losing it) A lock nut would also be a great idea to incorporate as well.

Works just as announced. Came in two different packages, in different days wich was a little confusing to me. I was not told so I presumed that the second part was missing. Later it was explained to me and the second package was delivered.

Work well, very pleased. Would recommend for the farm or work place...................................

Although I haven't used them yet they are very well built and solid, very good quality and they should suit what I need them for and then some.

Acheté pour équiper un mocro-tracteur, très satisfait de cet achat de très bonne qualité, monté en moins de 10 minutes. Généralement je fabrique moi même mes outils mais vu le prix cela ne valait pas le coup de m'y atteler. Le seul bémol pour un tracteur ( je m'en doutais avant achat) c'est qu'il faut modifier le 3eme point sinon la barre réglable finie par venir buter sur l'angle du châssis et plier si l'on n'y fais pas attention.

Forks are built good for the rated weight they can handle. Easy to put onto bucket. The hold down bolt is weak and bends easily and one of the bottom nuts fell off on mine while loosing the bolt from the bucket, the lock tight used to keep it on broke loose allowing the nut to unscrew from the bolt. I drilled a hole through the nut and bolt and installed a roll pin to fix it. Works great now

Everything is good I just wish the screws to hold them in place had something where you can use a wrench to get it tight other than that great product.