Kundenbewertungen für VEVOR Palettengabel 1490x100x230mm Gabelträger 1814kg Tragfähigkeit Gabelzinken 149cm Gesamtlänge mit 109,2cm-Gabelblatt Gabelstapler 495-915mm Einstellbar Gabelstaplerzinken Frontlader Palettenrahmen

Easy hook up and very useful; however, the two nuts on the tighten handles come on and off when handles are turning, in turn damaging the tip of the screw bolts. Consider replacing them with movable rotating washers instead.

We’re actually too short for basket we ordered longer ones and HAVE NOT RECEEVED THEM 🤨

I love the idea. I have difficulties locking the forks onto the bucket, and then releasing them once the job is complete. The forks have come loose a couple of times, as you extract the forks from under the pallet. Due to the short axle on the Bobcat, you need to be very careful of the weight, with the forks sticking beyond the bucket.

recommend more length on attachments bolts

They seem decent for the price ,haven't had a chance to try them out yet.

Prijs kwaliteit een goed product. Kwam niet compleet geleverd maar alles uiteindelijk goed en professioneel opgelost.

They are cheap but do the job just don’t pick anything up too heavy or you will either destroy the forks or bend your bucket

Bottom line I would recommend this product. Pros: Great price, quick free delivery good quality. Cons: the threaded clamp bolts are the weak link (they wander when tightening. Assembly should probably have (2) clamp bolts for each fork like a different unit that Vevor offers.

These work great for the price. Only small issue I had was the support brace only bolts on 1 side which allows the forks to swivel a bit, so I installed a self tap on the other side to fix that issue. But im thinking if you already have a tractor and bucket, you have the tools to make that modification :) Other note, these go on the end of your bucket, which means they end up being pretty far forward, which reduces the amount you can safely lift, so keep in mind you will not be able to lift as much as with a regular set of pallet forks. But for lighter duty, they are great, and inexpensive to boot.

Nice stable construction. However the lower mount points are easy too low for my ford 3000 (cat 1) - making it very difficult to go under a pallet. The mounting 'eyes' should have been around 10-20 cm higher up the frame