Kundenbewertungen für VEVOR Palettengabel 1490x100x230mm Gabelträger 1814kg Tragfähigkeit Gabelzinken 149cm Gesamtlänge mit 109,2cm-Gabelblatt Gabelstapler 495-915mm Einstellbar Gabelstaplerzinken Frontlader Palettenrahmen

I used them a few times before selling, once i knew i needed them i bought a pallet fork for my skidsteer

They are good for what you pay. The welds are shallow, not burned in, but they will work so long as you are gentle with them. I tilted my bucket a bit too much and broke a weld and bent one the first time using it. Not a big deal for me, I have a press and straightened it and then rewelded it and burned it in deep. Over all they are good I didn't expect a set of 500$ forks for the less than $130 I paid. I wouldn't even buy the steel and put them together for that, so rewelding joints isn't a big deal to me. The steel is good and thick, so that's not a problem.

Handy tool for my tractor. I’ve used them for moving my IBC tote full of water, moving logs, moving other equipment, picking up the front of my mower to change blades and clean out underneath the deck & still finding uses for them. I would recommend them for anyone not wanting to spend outrageous amounts of money on true quick connect pallet forks for their tractor.

Pretty sturdy forks for the price,

Everything is great except the nuts should be locktited to the tightening handle. When you loosen, the bolt screws out of the nut leaving it on the bucket. When you back out you loose it. You have to install the nut back on the handle everytime. Unhandy.

Very heavy duty.

Simple heavy duty and great for the money! Definitely got my money worth out of them already

Good deal for the price. Clamps and stabilizer are cheaper but no complaints for the price.

One of the nuts fell off and is missing. The nut is at the end of tightening bolt that holds pressure on the bucket. Or it is a locking nut to lock bolt in position .

Good value, one complaint spacer bar between the forks, falls off or moves down when forks are vertical. To fix, I drilled a 3/8 hole vertically through the forks, on both forks and the sliding part that goes over the forks. I used a 3/8 bolt with lock nut and have not had any more trouble with it. Vevor, you might consider this fix. Wayne