Kundenbewertungen für VEVOR Palettengabel 1090x70x230mm Gabelträger 907kg Tragfähigkeit Gabelzinken 109cm Gesamtlänge mit 76cm-Gabelblatt Gabelstapler 495-915mm Einstellbar Gabelstaplerzinken Frontlader Palettenrahmen

These forks work really well. I have used them to move several things already from light to heavy stuff and they have worked flawlessly.

They clamped right on and have been extremely helpful to have and make jobs easier

I got these for my MF GC1725 and they work great! So far I’ve used them to pick up piles of brush and vines to place on a bonfire. Worked great!

Excellent product. Does what it should. Delivery on time and quality product. Strongly recommend for anyone requiring a quick solution to afix to a tractor bucket.

work great on our little kuboto.......................................................................................................................................................................................

Really looks well built and strong. Unfortunately box was torn and missing two large "L" bolts and two wing nut bolts I did contact customer about it.

These are very nice forks. They fit and work great on my loader tractor.

These pallet forks are the lowest price I have seen and are even significantly less than secondhand pallet forks so they're ideal for occasional use. It's a basic piece of kit and providing the welds are checked and okay there's little to go wrong. My only niggle is the pins for attaching the lower link arms. These would just wiggle about and would risk causing problems but its a simple job to replace them with pins bolted into the pallet fork frame.

Completely satisfied. I use the 3-point mounted pallet forks for tons of stuff around the property and even to unload lawn and garden tractors from the bed of my truck. You can't quite see the forks in this image but they are under the ramps which rest on the truck bed. Roll the tractor seamlessly from the truck bed onto the ramps that are secured to the pallet forks. Then just raise the hitch forks up and go. I also use them to take heavy trash bins to the curb and with a carrier bin to move lots of stuff around with the forks. Highly recommend especially at this price.

In all fairness, I reluctantly ordered these fold down 3-point forks to move pallets of lumber and set average logs on the mill. Loader forks were out of my price range at this time. I never intended to use them for extreme lifting, but of course, that's what I needed when they arrived, (two packages, a week apart) Coming off a two week bad spell with a tweaked back, I needed to get a large log onto the mill. Advertising listed them at 2200 lb rated. I put them on the tractor (1986 Ford 38HP) and set them down next to this particular log, then rolled the log onto the forks and shortened the top link to keep it in place.When I lifted the 3-pt the tractor grunted some but it lifted, so I backed up to the mill and set it on the rails... Done, every body can relax again. Turns out the my Log Weight Pro app says that log weighed 2780 lbs! [25" x 13' 8" Eastern Hemlock... look it up] I DO NOT recommend anyone else over load any equipment, and had I looked up the weight beforehand I would not have challenged fate. No cracks, bends, or any signs of my abuse so this one gets 5 stars. Sidenote: I will be adding 6" chain locks to keep them upright when not in use. [Danger] I'll be recoating them with a quality bed liner in spring. But nobody will cut the parts out (so you can weld them) for the price. Fold up forks, carry-all, round bales, slabs, log loader on a ground level sawmill.