Kundenbewertungen für VEVOR Nietmutternzange-Set Blindnietmutternzange 410 mm, Nietenzange 13 Sätze von Muttern & Dornen, Nietmutterwerkzeug M3 M4 M5 M6 M8 M10 M12 Profi Handnietzange, Nietmaschine Gewinde Nieten

The tool arrived quick enough, looks well made. I used it to repair stripped threads in my snowblower. I used the 1/4-20 rivnuts. The first one worked perfectly, the remaining 5 not so good. After compressing the rivnut I couldn't unscrew the tool easily

The tool is stout enough for setting the rivet nuts, but the automatic removal components are sticky and weak at best. I would suggest saving your money and buying the manual setter. With time and lubrication the tool may start to automatically unscrew after setting a rivet nut, but the parts are very small and will probably wear out first. All the setting dies are hardened steel and changing size is quick and painless. The case holds the tool and dies well, but the pockets for containing rivet nuts is non-existent. I ended up buying a fishing tackle box to keep the rivet nuts in.

Na

helaas geen goed product. zeer zwakke klinkmoeren en kromme trekbouten

This tool works quite well for installing rivet nuts if you have a ton of space to use the handles. This tool does not work in tighter ish spaces and I have to use my diy rivet nut installer which takes forever. When this works, it is quick and flawless. Switching sizes is easy and quick. The main tip i have is that the metal shaft that the mechanism slides on needs to be heavily greased In order to avoid wrecking it.

Outil solide mais arrivé défectueux de sorte qu'il a posé deux rivets et ne fonctionnait plus. Pour ceux à qui cela arriverait, une vis interne doit être collée pour ne pas dévisser. Simple mais frustrant.

Mandel stripped on first rivet nut sent video as requested and had problems receiving file have tried several times with no luck this is not like Vevor so i just bought a new one with no problems

Bought this to do a few nut spurts on a job and only got 5 done and the riveter broke and I could not finish the job j was very disappointed in the quality and I could not even use a replacement gun for the size of insert that came with the kit with one that a friend had completely different would not recommend for anything bigger then 1/4” and that is pushing it

It seems like ok quality but no good after doing 6 nutserts. Thread damaged. Disappointing!

Bonjour, à ce jour, je n'ai toujours pas mon colis. J'ai contacté le transporteur DPD FRANCE, il devait faire le nécessaire. Le transporteur devait m'envoyer un document à remplir et le lui renvoyer et je devait vous contacter pour signaler le problème afin d'être remboursé. Pouvez vous prendre contact de votre côté avec le transporteur et me tenir au courant merci. Cordialement Mr GARÇON Richard