Kundenbewertungen für VEVOR 36-Zoll-Magnetkehrmaschine mit Rädern, 55 lbs Kapazität, mit ausziehbarem magnetischem Aufnahmewerkzeug, verstellbarem Griff, magnetischer Aufnahmekehrmaschine zum Aufnehmen von Nägeln und Schrauben, für Werkstatt, Garage, Hof

Easy assembly and work great

Worked better than expected. A great Christmas present for anyone that has a problem with nails in their parking lot.

Funktioniert tadellos! Der Magnet ist richtig stark

Good for picking up metal on garage floor and paved driveways. If your using it in grass or uneven ground the wheels dont give enough clearance and alot of what ya pick ip gets knocked off

Really strong quality built tool and extremely fun to use

Works great. nice and wide. I couldnt believe how many nails and screws it picked up. wrll worth the money!

Great product

36” version. Sufficient to pick up 2 inch siding nails adjusted at maximum height. As others mentioned the magnets could be stronger, but it does the job. Works fantastic on even ground with no obstructions (thick grass can wipe off what it collects.) I would recommend a narrower model for uneven ground. Wheel height adjustment could be improved. One side is hard to tighten without it slipping without taking the cover off. Overall great value. Would buy again.

Originally I bought this to use after the roofers left. It worked great. Also used it to find metal things in my small atv riding area.

I purchased this to pick up the miriads of nails and other metal debris left behind by an old, wooden pole barn salvage. The good wood was harvested. The rest was burned in place. All in all the sweeper did its job. It removed about 75 pounds of tire-popping stuff from the burn piles and the surrounding lawn. I had to raise the clearance for use in my "bumpy" yard. It really wasn't intended for very bumpy surfaces. The adjustment process was a pain. You must dismantle each end of the sweeper, loosen and re tighten some nuts to shift the axles, and then reassemble. Two of the 8 screws holding the end plates were stripped from the factory. Fortunately, 3 on each end was enough to hold it together. If you are going to use this sweeper on a fairly flat surface like a shop floor, it will work great right out of the box If you use the sweeper on a bumpy lawn and burn pile, be prepared to increase the clearance and do a lot of brute force manipulation. Even with the construction quality issues and bumpy surface difficulties, it did its job and was worth the price paid.