Kundenbewertungen für VEVOR Lenkradständer 600–830mm Gamesitz 0°-40° Spielsitz aus Stahlrahmen Rennsimulator für Rennspiele Spielsitz Rennsitz Racing Sitz für Logitech Thrustmaster Fanatec Hori und Mad Catz

Very good. Sturdy, adjustable chair wheel lock tray works well. I do wish they made a seat add on like nlr as an upgrad

1 - Instructions are bad, not clear and you have to guess a lot. 2 - Product is pretry heavy, so be prepared to lift some weight. 3 - Sturdy, heavy and steady. Yes, pretty good quality. 4 - For the money is good, but not great. Could be better.

Bien mais un peu galère surtout pour mettre les pédales pas assez d angle et de trois pour accrocher

Ogolenie spoko produkt mocny , tyci brakuje by produkt się stał produktem premium .. ogólnie to polecam ...

The protective plastics for the height adjustment tightening screws were completely broken when I opened the box. The metal of the rear edge of the pedal plate is raised up, the outer edges of the metal are dangerously sharp, which can break the sole of the foot and cause an incised wound. In the design, the platform of the pedals has sharp edges throughout. During the transport, the package had been opened several times and it had been really badly shriveled to make it completely shapeless.

PRODUCT VEVOR Foldable Racing Steering Wheel Stand - WS-L01 REVIEW 100% better than using your wheel clamped to a desk or your pedals loose on the floor. I never got into racing games, even though I had a wheel and pedals. Prior to using a stand (like this one) my controllers were never at the right height and moved around too easily. I did not want to invest a ton of money on an expensive racing rig, I just needed something basic to hold my wheel and pedals securely. This stand does that very well and is a good value overall. For the most part it is already assembled, you just need to install the shifter bracket (if you need it at all). Otherwise, you just unfold it and adjust it to your liking, then attach your gear. Now only my poor racing skills are the issue, not the slipping and sliding gear. There is one issue that is a design / packaging flaw. It is hard to describe you should see the pictures. Basically the assembly bar that holds the steering wheel and shifter can slide too far down into the base of the stand. This forces the built in metal receivers for the shifter into the plastic height locking mechanism and damages that mechanism. Once you force the steering wheel bar out of the height locks, the locks are damaged and misaligned. With a little persuasion, you can get everything aligned again and working. In then end it just becomes cosmetic damage. RECOMMENDATION This is a great starter racing stand, and other than the defect described above, I recommend it for anyone new to racing.

Muy buena compra, los pedales y volante (Logitech g920) se anclan muy facil , es estable y, al menos en mi suelo, no desliza nada y mira qe el pedal de freno del g920 es muy duro (yo le quité el tope que trae de serie). Se puede plegar con todo anclado y ocupa muy poco espacio. Para comenzar en el simr o para casos de poco espacio en casa lo recomiendo mucho. Ademas viene con el soporte para el cambio en H y bridas de velcro para organizar los cables. Bien embalado, entrega rapida. Muy recomendable sabiendo el uso que se le va a dar. Yo juego desde el sofa y la altura y ajustes varios son suficientes.

I ordered this stand for use with a Logitech G920 Wheel + Pedals as well as a separate 6 speed H style gear shifter. The assembly was straight forward and fairly easy. There wasn't a lot to do before it was unfoldable into a stand. However, the gear shifter mounting arm and plate that attaches to it seemed out of alignment. I guess the arm does stick out to the side in the pictures but the vertical positioning seems to be off and the plate that sits on top is almost non-level. Just seemed a bit off. Stability once assembled is a little wobbly but that's somewhat to be expected when making a portable/foldable version of a stand. Left to right wobbles a bit but not much front to rear. It did stay stable during game play so not necessarily an issue. The kit comes with additional bolts for securing the wheel, pedals and shifter. 6 for the pedals, 2 for the wheel and 4 for the shifter. The wheel itself has a bracket system in the front and the two bolts secure the rear of the wheel to mounting plate. Those holes lined up perfectly with the G920. The pedals were slightly less lined up during assembly but I was able to screw everything in. The shifter I used was an unknown brand I hadn't heard of before but I was able to secure it with 4 bolts that lined up ok. That's a whole different review. For what it is (foldable) it seems to be fairly decent but could use a better bolting system for the shifter arm. That portion just feels less cohesive. I'm 6'2\" and found the height to be acceptable with some additional room for expanding it.

I would give this racing sim/ wheel stand a higher review, but there are a couple shortcomings. First, mine was received damaged despite all the padding inside the box. The adjustable main frame that holds the wheel itself was jammed in too far and I needed to detach it using a hammer, which is less than ideal. Subsequently, the plastic collars that the frame sits in on both sides were cracked already. This doesn't really affect functionality, but for the price, it would be nice to receive one in pristine condition. The second shortcoming is that mine is wobbly. Not sure that it was caused by the shipping damage that also made the frame stuck, but my unit isn't 100% stable. This factor does affect functionality when playing. Its not a huge deal, but a minor nuisance. The third shortcoming is having the platform that holds the foot pedals a smooth metal and not having a rubber mat or something of the sort to place the pedals on. When playing a racing game, especially if you're actually using the clutch pedal to shift gears, the lack of grip on the platform makes it easy to kick the pedals off of the stand. I have yet to figure out a permanent solution, but currently using two old belts to hold the pedal control in place. Overall, it is a decent product, maybe I just received a defective unit, but considering the price compared to comparable products, it's a good budget unit. It is pretty heavy duty, easy to set up and is easily adjustable.

It is more comfortable to use the stand compared to using the desk for sure. The thing said to be compatible with Thrustmaster steering wheel and pedals, and it is kind of yes, but not exactly. There was nothing in the box to actually connect the thing, and there were no openings on the plates corresponding to the steering wheel part. So, after using a bunch of zip ties and stuff, we did attach everything to the stand, but now it all works well. When they show how nicely the stand can be folded and stuffed under the couch, they do not mention that there would be the steering wheel and pedals attached so it wouldn' t actually fit this way at all. It is foldable, and it takes less space than if it was unfolded. but do not expect miracles. It is super easy to fold and unfold it.