Kundenbewertungen für VEVOR Lasthebemagnet Kranmagnet (600 kg Tragfähigkeit, 1500 kg Zugkraft, -40 bis 80 ℃), 12 Stk. Magnete Handgesteuertes Gabelanheben Magnetlifter Magnetheber Gelb Neodymium Lifting Magnet Werkzeug

I don’t think this is capable of lifting the advertised weight. If it can, then I must be using it wrong. I tried several times to lift a plate vertically, and each time the magnet would slide off. The plate is approximately 400lbs. I also tried to lift the plate flat, and it would hold for a moment then let go. To be fair the metal I am lifting has surface rust so perhaps the metal needs to be clean first. I respect its boundaries and it works well when I do that.

Does not provide 600kg of lifting force as advertised. Would not hold onto a 20' x 2" x 1/4" square steel pipe weighing less than 200kg. Magnet does turn on/off with switch Magnet does have a safety. But is drastically overrated. Working load with the 600kg modle is less than 100kg! It will be returned!

Lucky to lift 9kg definitely not 90kg bought it for lifting individual sheets of colourbond but it’s to week to even do that..

CAUTION! Magnet does not hold as represented. Only use for very light-weight materials. 40 lbs MAX.

I don't think it would hold up 500lbs to be honest I want to send it back but I think it is to late to send it back

This item came damaged, went through the Vevor help center and they are a joke to be modest. I was told to take a hammer and beat on the item to make it better. It was smashed in on one side, the operation handle was bent and the keeper is broken. How is taking a hammer to it going to make anything better? What a joke this company is. All would be good if they would just replace the damaged item, but no, they have no interest in repeat customers. Well, eventually they will run out of people willing to purchase from them.

Biggest piece of junk I have ever bought and trying to get it refunded and return is aweful this is the second one and it was junk line the first I don’t not recommend this product to nobody

I bought this for my small metal working shop to help me move thin gauge sheet steel. I won’t hold anywhere near the stated capacity. It can’t even hold a single sheet of 16ga steel which is around 80lb. I’ve cleaned the magnetic surfaces and wiped down the steel surface too. It consistently drops the sheet every time. There is probably a disclaimer somewhere or some highly limited test protocol used VEVOR can fall back on to say the rating is okay/correct, but for regular every shop purposes, the max is probably around 75lbs in real life.

The magnet dosent lift 50kg it is nat holding plate firme and whene whant to lift id dosent hold... i am disapointed

Wat een rotzooi , trek hem er met 1 hand af kut ding