Kundenbewertungen für VEVOR Kraftstoffkanister, 20 L, Benzinkanister mit Ausguss & Komfortgriff, max. Durchflussrate 6 l/min, Metall-Benzintank für die meisten Autos, Motorräder, ATVs & UTVs, rot, 2er-Pack

I was happy with the price on these 2 Jerry cans, but the short plastic spout, rather than the longer, metal gooseneck spout leaves a lot to be desired. Had the opportunity to help my daughter when she ran out of gas, but the spout is so short that the metal edge of the handle was right up against the car, scratching it. Did the same to my car when testing it out. A longer, metal gooseneck spout would have been a huge asset.

Plastic spout broke right off the start Return to the metal ones. That's what my customers ask for

Was not as advertised.

the safety feature that is used to prevent unscrewing the filler/funnel were broken on both fuel cans IN THE BOX! I have not used these cans yet. If you were counting on this feature to prevent a child from opening the filler, DON'T. This particular feature is very poor! I will be using these cans this weekend as this feature is not needed for my use.

Unfortunately the item got lost in shipping. Never received them.

Dude there where metal shavings in my tank!? What the hell? What if i used this on somthing without a strainer? Cant upload a puc because you guys reqire me to convert the image and make very tiny 🤦‍♂️

The cans are totaled garbage. They obviously don’t have research and development because I tried to use one to fill my car and the spout noon and improve design. It’s not even long enough to reach into the gas tank. It’s pretty sad. They’re probably only using half the metal the original cans head already they they have expanded enough to dent the cans. The quality is garbage, nothing compared to a real military can.

The spout is just horrible. When the tank is full and your trying to fill a mower the fuel will spill. Hard to fill slowly. The spout gets pushed in and gas rushes out. The mower tank gets full so fast it overflows. Plus no side handle makes it even more difficult to pour and stop the flow. Then the valve creates a vacuum so when it "burps" gas will overflow even more. Added a side handle and replaced the spout just when pouring the gas.

It looks like the real Jerry can, but it is thin metal which can't withstand the pressure of expansion with a 30 degree temperature change. I filled it in the morning at 68 degrees and it got up to 96 degrees for a high. the cans deformed to the extent that they do not sit straight, and the sides are bulged out. I also had two 23 year old Jerry cans that I got in Germany and they had no problem handling the pressure. Also the paint runs if you spill a little fuel down the side. The cap locking system is cheap plastic and flies off with in a few uses.

Ordered clamp on metal nozzle gas cans. Got plastic screw on cheap nozzles. Scam