Kundenbewertungen für VEVOR Honigschleuder Manuell Tangentialschleuder 2/4 Rahmen Honigextractor aus Rostfreiem Stahl 48x23cm Wabengröße(Tief) 48x16cm Wabengröße(Mittel) 45mm Honigschleuse Ideal für Hobby-und Profi-Imker

Overall well pleased with this extractor the only thing I think needs to be addressed is the legs are very thin and weak. It makes it hard to try to stabilize when spinning:

My frames were slamming against the crank assembly so.. I had to cut about a half inch off of the shaft on the basket assembly (lowering the basket to make more room at the top). Now, it works.

It is a good low end extractor. The feet on my extractor has broken off after the first use. That is easily over come. I'm just concerned with what will be next.

This unit will work for 2 deep frames or 4 medium frames. For a small scale operation it works okay. Assembly was easy. Pros are the price. Cons are that if you are using a screen sieve on top of a 5 gallon pail to collect the honey you will need to set it on 2x4s or the gate won’t be high enough to clear it. Not a deal breaker. Instructions suggest bolting the legs to plywood but I used it without doing it. You do not have to spin the frames fast in order to spin out the honey. A couple of minutes per side is all you need.

Our extractor arrived quickly, and works wonderful, but when it arrived one half of the lid was broken into pieces. I took a picture and emailed it in, but never heard a real back. It would be nice to have the lid completely in tact, if pos

It was a good machine for a small honey harvester. I used it two seasons, harvested around 400lbs of honey and the leg weld broke. Ihad it bolted to the floor and did my best to be careful amd easy with it. The legs are not attached well at all. AND when I originally looked at the product the advert was misleading because the legs LOOK like the bolt on. It was decent for $125. I wouldn't buy it again though.

Bad customer service no free return

The purchase was not accepted and was sent back to you. Please check it and refund my payment.Thank you!

Pentru cei cu rame mici este excelent.

For a first extractor, this one is not bad at all and very easy to use. You do have to work with it quite a bit to get it stable and wind up the frames slowly to keep everything in balance, but for a first piece of equipment it did just fine.