Kundenbewertungen für VEVOR Funkenfang für Feuerschalen φ914 x 245 mm Feuerstellengitter Funkenschutz Edelstahl Funkenhaube 2-mm-Maschenlöcher Feuerschale Funkenschutzhaube Ideal für Feuerstellen Feuerschalen und Kaminen

Très satisfait de ce produit

Der Aufbau war etwas schwierig, da die Anleitung nicht sonderlich gut war. Das Produkt an sich ist super. Einfach zu bedienen und ist qualitativ echt hochwertig. Ich würde es auf jeden Fall wieder kaufen.

alles Bestens, beim Zusammenbau darauf achten, es hat zum Teil scharfe Kannten, Handschuhe verwenden.

This stainless steel spark screen is something all should buy for their bonfires. No burning sparks shooting out to burn skin, a hole in clothes or seat cushions or embers to cause a fire. Perfect when there is an advisory with fire ban. The lifting of a side is so convenient to add more wood. Rounded high enough for a decent fire and allowing heat on the cooler nights. Nice there are different size choices. I have purchased 3 (2×40" & 1×36"). The 36" is a Christmas present.

Der Funkenflugschutz ist Qualitativ hochwertig, nur der Zusammenbau ist trotz spärlicher Anleitung Recht schwierig. Aber alles in allen top.

This spark screen fit my fire pit perfectly. I replaced the pivot screws with Clevis pins and drilled them through the sides of the fire pit. This made the installation permanent. The edges of the stainless mesh are sharp so definitely wear protective gloves when assembling.

While I agree that it is a quality cover but the downside is that it is not 20 inches in diameter! Also it’s kind of a pain putting it together.

this thing is slick easy to use and works so well i ordered 3 more for my neighbors at the camp ground.

Little bit of a pain to assemble, directions could be better. The unit itself is very high quality.

The spark screen does what it's supposed to. I've only used it a few times but so far I haven't seen a single spark get through while. It's nice to know that I can reduce the risk of the neighbouring forest burning down. Assembly was straight forward but some of the metal edges are sharp so have gloves ready if you're wary. I would suggest adding a jam-nut to the pivot bolts to prevent them working lose during usage and having the halves separate. Other than that, it's money well spent.