Kundenbewertungen für VEVOR CPU-Flüssigkeitskühler, AIO-CPU-Wasserkühler – 120-mm-PWN-Lüfter & -Pumpe, PC-Wasserkühlung mit 5,3 cm LCD-Display & ARGB-Licht, für Intel 115X/1366/2011/1700/1200, AMD AM4/AM5

It took over a week to deliver even though the ad showed next day delivery. The item was boxed well as expected. I mounted the AIO in the ceiling of the pc box, perfect mounting. There was no instructions indicating which way the cpu block should be oriented. After mounting the AIO with the two water lines at 12 o'clock, power on showed the orientation was wrong. So I recounted the AIO block with the water lines at 3 o'clock position, the water lines close to the dram slots was correct. The AIO displayed max sheet of my AMD 5900X got up to 70 C. The two rub fans plugged into my rgb hub no problem and that sync the fans with the PC fans. At this price point I would recommend purchase, it is a good deal.

Verpackung war sehr gut, alles kam unversehrt an! Da es ein geschlossenes System ist, muss man keine Flüssigkeit selber einfüllen!!! Anleitung sehr detailliert, die Montage war schnell und einfach! Macht keinerlei Geräusche, außer wenn man sein Ohr fast im Lüfter verlieren will, dann hört man ein sehr leises und beruhigendes Geräusch wie Wasser im System transportiert wird.

This is an "all-in-one" (AIO) water cooler, so the liquid is already inside the radiator when you receive it. Just connect it up and you're good to go. Note that with this cooler, the pump isn't actually inside the CPU block. The pump is on the radiator, enclosed in that rectangular plastic housing next to the fan. I opted for the 240mm one. This fits the front of my NZXT H510 case perfectly. Oh and just to be clear, I don't recommend this case for water cooling due to the weak airflow in the front of the case. It's just what I had available at the time of the review. I flipped the fans on the radiator around into a pull configuration (the fans "pull" air through the radiator), as I don't think there's enough clearance and airflow in the front of the case to leave them in the push configuration. Since the fans are now blowing hot air inside the case, that air needs to be removed in the usual way using the rear and top exhaust fans. With the radiator installed, I had just enough room to fit my 5070 Ti. I don't have a demanding CPU. It's a 12th gen Intel i5 with a 65W TDP. This cooler keeps the CPU temp under 60 degrees celsius even when all cores are pegged at 100%. The pump is powered by the 3-pin connector. Even though this is a 3-pin connector, I think the motherboard should be set to PWM so it gets the full 12V from the PUMP_FAN1 header all the time. In other words, the pump should be running at 100%, but the radiator fans can be throttled based on the CPU temp as usual. At least, that's the way I set mine up. On my MSI motherboard, PUMP_FAN1 can supply 3A of power. For security reasons, there's zero chance I'll be installing the software to control the small LCD screen on the block. It'll just have to display the default logo in the wrong orientation for now. Either that, or I'll just leave the USB connector unplugged. The USB connector seems to only be used for configuring the LCD, so leaving it disconnected is fine. I'm not sure I like the way this mounts to t

qualitativ hochwertig, sehr leise (mit Fancontrol geregelt), einfache Montage (intel Frame) meiner Meinung eine der besten AiOs auf dem Markt

Ich bin absolut zufrieden mit der leistung dieser Kühlung. Mit hoher Leitung kommt sie gut zurecht und die Lüfter sind von Haus aus recht gut eingestellt, dass nicht zu viel lautstärke entsteht. Montage fand ich auch relativ unkompliziert. Für mich ein sehr gutes Preis-Leitungs-Verhältnis.