Kundenbewertungen für VEVOR Deionisiertes Wassersystem für Autowäsche 1250 L, Wasserdeionisierer für Autowäsche mit Dualen 4L Gemischten DI-Harz-Filterkartuschen, Deionized Autowaschanlage mit Rollen & TDS-Meter für KFZ

No Spots!

The seals they provide for the fittings are incorrect and they do not make or sell the correct fittings. If you go and find and purchase the fittings and seals for the unit it works great.

My 1st impression is that the build quality is outstanding. Very solid unit and neoprene outer sleeve is very nice. The unit came with filter and DI beads already installed. All I had to do was connect the fittings. Based on other user reviews, I used plastic quick connects vs the provided brass ones. Now for the best part . . . My water in south Texas is 344 ppm. This unit brought that down to 0.00 ppm with zero leakage! I would highly recommend this to DIYers and professional detailers. At 1/2 the price of comparable units, you can't go wrong. This is the second product I have purchased from VEVOR and I am very impressed.

jag är helt chockad vilken skillnad det blev. Jag använder det efter ordinarie tvätten på bilen, sköljer av en sista gång det räcker inga som helst vattenfläckar. Toppen

Ok I didn't expect it to be massive! This thing is almost the size of a scuba tank but wider. Comes nicely packed and almost ready to. Install the fittings on both side and don't forget to put the handle on. Connected to a water hose and open the water flow really low as it's recommended for max flow of 3 gpm. Let it flow for 5 minutes and then checked the TDS and was surprised to see 0 TDS. I got the unit with the bypass valve and the manual doesn't say anything about some other stops on the valve like backwash and quick rinse but I put the valve on those setting and it didn't flow any water so I assume that it's just bypass and filtered. Remenber to use the bypass setting for washing the car and initial rinse, after that switch the valve to rinse for the final rinse and your filter will last you a longer time!

Works well for me. No leaks. Satisfied with this product.

Pulled my water from 219ppm to 0.00ppm in my detail shop...leaving no water spots!!!

After assembly I checked for water leaks. Ran water through at a very slow rate in bypass mode. Turned valves to non bypass at same slow flow rate and ran for about 2 minutes. I disconnected my hoses and let the resin soak for a few days. My water tester registered a TDS of 211 ppm on the input flow side. Before the soak, I was getting an TDS of 25ppm in non bypass mode. After the soak, I am getting a TDS of 0 ppm on my tester and on the onboard TDS meter in non bypass mode. The unit is working very well.

Easy to use and works flawlessly! Had a small issue with my handle breaking, but it was quickly resolved with their support team! Highly recommend!

Life changing