Kundenbewertungen für VEVOR Bolzenausdreherset mit Bohrern 54-tlg. Schraubenausdreherset mit Adaptern & Stabilem Aufbewahrungskoffer, Schraubenlöser aus Cr-Mo-Stahl zum Entfernen von Bolzen & Muttern & Schrauben

Purchased this set with the intent of recovering 3 broken bolts from a 2013 Land Rover LR4. First two were 6mm bolts broken off from vibration in the timing chain. Using the reverse bits to first drill holes into the bolts and then driving the long thin extractor (1/8" socket style was too large) the bolts came out on the first attempts. I was two for two! Then a few days later I made an attempt on a broken m6x25 with a missing T30 torx head. Using the same method, drilled with smallest bit then next size up, drove extractor into hole. Attached wrench to extractor and began to apply pressure and the extractor exploded/shattered just above the bolt and now partially sticks out. Third time was not the charm! Now considering welding nut or attempting to extract the chromoly extractor by grinding with diamond dremel bits and trying again with a different manufacturers product! Quality of these bits is suspect and not sure I would recommend the product.

Great product except for the 1/2" die stripped out on me re threading a stud.

It still has not been delivered