Kundenbewertungen für VEVOR 341 L Sandstrahlkabine mit 6,8 L Staubsammelsystem 2,76-8,27 bar Sandstrahlkabine mit Ständer Hochleistungs-Sandstrahler mit Strahlpistole und 4 Düsen zum Entfernen von Farbe und Rost

Molto bene come da descrizione rapida consegna venditore professionale perfetto come da descrizione.

The cabinet is of good quality. Give some time to study the instructions before assembly. I used the sealant supplied to seal all the joints. This is most important. I had done a lot of reading and watched a lot of videos on modifications so I was fully expecting to have a bit of work to do. The siphon tube works but is a pain. I added a metering valve to the underside and this has transformed the cabinet. I also made a trolley for it so I can move it around. Im using a fine glass bead on small parts. Sometimes I think I need a coarser grade which will come in the future. Be prepared to experiment. With all the changes I am very happy with the initial purchase.

This sand blaster is awesome pieces fit perfect solid . I would tell anyone who needs a great sanblast cabinet to not be afraid

Nicely packaged; quick handling and delivery. Easy to follow assembly instructions. Well featured with LED light. Works great with the correct blasting media. Recommended.

This works well, does need definitely high flow air compressor to work really well. But happier than cheaper ones I’ve used.

This thing is Large. This thing is Loud. I bought this to sandblast wood pieces after cutting them on a CNC router. It saves me time from having to process them by hand. It was a pain in the butt to set-up. I had to unscrew some parts and redo them correctly, not because I can't read but because the manual has images packed full of multiple installation steps in one picture as well as multiple numbered paragraphs that somewhat relate to them. Take a really close look at what pieces overlap others when setting it up. Make sure you have someone to help you. I did it by myself and only hurt myself a few times. It would've been better if someone else was there to laugh at my mistakes. Please keep in mind that the product comes in two packages. The cabinet arrived first for me. I panicked when I couldn't find the vacuum/sandblast media reclaimer, but a quick look at the shipment details showed that two packages were sent from two different places. Running this together with a compressor uses quite a bit of power, so make sure your power outlets can handle it. Wear ear protection if you value your hearing. I made some modifications to this. Instead of using the air hose barb fittings, I bought a 10mm OD Polyurethane Hose kit. The kind that uses push to connect fittings. It was a bit difficult to remove the barb fitting from the sand blasting gun, but with a bench vise, a wrench and all the passion I could muster it was possible. An upgrade I installed was a pressure regulator/moisture filter I installed on the side of the cabinet. I also installed a push to connect splitter on the hose inside the cabinet which I used to connect an air spray gun, so I can blow dust/debris from the parts I've sandblasted. I plan to add better lighting at some point in the future. I recommend this sand blasting cabinet.

This cabinet works very good I install a led light to add more lighting 5 star rating. Vacuum works well. Take a little time to put together but will save you time on cleaning Parts up. There are holes in the bottom of the legs if you want to put wheels on it

Working on assembling this unit with all the upgrades. This unit will allow me to clean and prepare rusty parts for painting for restoring vintage cars.

Kein Vergleich mit anderen Produkten aus Fernost. Super Verarbeitung. Alles stabil. kein dünnblech. Alles dabei was man braucht (außer Sand). Ersatzfolien für das Schutzglas sind auch mit dabei. Das Glas ist wechselbar. Dämpfer an der Klappe. Das Licht ist auch gut.Ich habe nur den Anschluss getauscht und einen regelbaren Druckminderer angebaut.

Die Kabine funktioniert hervorragend! Ich habe beim Aufbau zusätzlich (hochwertigeren) Dichtkleber verwendet, um wirklich alles dicht zu kriegen. Zusätzlich betreibe ich die Kabine nicht mit dem mitgelieferten Filter, sondern mit einer Absaugung bestehend aus Werkstatt-Sauger und Doppel-Zyklonabscheider. Als Strahlmittel wird 0.2-0.8mm Schlacke verwendet. Bin vom Ergebnis absolut begeistert! Für jeden, der ein altes Moped restaurieren, oder gerne etwas umlackieren möchte geradezu ideal.