Kundenbewertungen für VEVOR 88 mm Tiefbrunnenpumpe 750W Brunnenpumpe 105L/min Tauchpumpe max. Förderhöhe 62m Rohrpumpe 230V 50Hz Sandpumpe IP68 Wasserpumpe 11 Laufradstufen Pumpe Ideal zur Bewässerung oder Wasser-Versorgung

Arrivé très rapidement bien emballée Très bonne pompe débit important mais pas de clapet anti retour

livraison sans reproche , super bien emballée , mise en route simple ,fonctionne bien , avoir dans le temps . la pompe ne fonctionne plus un fil du condensateur intégré s'est coupé

So ein gute Qualität. Vollste Zufriedenheit mit der saugleistung und vor allen die einfache Installation der Pumpe . Jederzeit wieder und zum weiterempfehlen. Vielen Dank

pompe magnifique très puissante je recommande ce produit utilisé pour un forage profondeur 12 mètres diamètre 125mm

Bomba de água, excelente qualidade, embalamento top, preço não há comentários , obrigado Vevor recomendo.

I was really impressed about the quality of the pump. Good materials, solid construction, easy to install and perfect result. The pump is functioning during the hot pre summer season very well, we have a nice green new grass carpet in the garden now.

Es impresionante la potencia de extracción de agua en un pozo de más de 20 metros de profundidad. La instalación es muy sencilla y la desconexión automática incluida en la bomba es muy práctica y facilita mucho dicha instalación. La verdad es que al recibir el producto no daba crédito a que me hubiera costado el precio que pagué.

Works great! Took the motor off and it hooked directly up to my fountain. Pond never looked better!

Bought this pump to use the motor on a pond fountain. It hooked up perfectly to the spray nozzle. Works well! I’ll be buying another one for the second fountain…😊

This review is for the 1HP, 750W, 115V VEVOR deep well submersible pump. I use the pump vertically in a 30 foot, hand dug well so relatively shallow. The line was kept at 1 ¼” with Vinylite G911 tubing and stainless fittings. After about running the pump for maybe 20 hours over this past summer, I am very happy with the performance and output. Since I am in an off-grid situation, I rely on a solar-battery system with a back-up generator. During start-up, my 2,000 watt invertor (4,000 W peak) wasn’t able to run the start-up phase but another 3500W inverter worked well. Off grid users should be aware of this limitation when deciding on a pump motor size for their system. My Honda 2200W inverter/generator was also able to run the pump but I doubt it would power a 1.5 HP unit, again, because of the start-up requirement. The attached photos show the install, examples of output with a 2” fire nozzle and large sprinkler, and pressure measurements with both full open and full closed line, the latter measured at about 75psi. The full-flow, open output pressure of about 25 PSI may limit the operation of some sprinkler devices but with my large nozzle, I could send a water stream about 60 feet – very useful for fire control. I estimate that the pump could produce about 5,000 litres per hour at full flow from a water depth of 25 feet. Another important feature that the user will have to consider is that the pump has no automatic pressure cut-off switch. If the user is only using it in just an on-off scenario this doesn’t matter but the pump is not designed to operate without flow due to overheating issues. Next summer, I’ll experiment with a pressure cut-off switch or pressure tank. I would recommend this pump for quality, performance and especially value.