Kundenbewertungen für VEVOR 6 Stk. Aluminiumlegierung Siebrahmen Siebdruckpresse 25,4 x 35,6 cm, Siebdruckmaschine Zubehör 110 Mesh, Säureresistenz & nicht Verformbar für Kissenbezügen, Stoffen, Papier, Kopierpapier usw.

These a SUPER LOW Tension screens! Thought I would give them a try. For me they will not work. While coating with a scoop I had good tension on the sides but it will lay down a super thick layer on the middle. Tried 110 and 160 mesh. Same problem. Just my experience tho.

I do not recommend these screens for an experienced screen printer. The screens are too thin, the mesh is adhered to the screen with tape, the tension is very weak. I do not recommend these screens.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

The tension is way too low to get a good print, not recommended for any serious work.

These screens are advertised as high tension, but that is not the case at all. They are some of the lowest tension screens I've ever used, and I'm always out of registration when I use them, there's no way to print more than one pass using these screens. You're much better off spending more on nice frames, because the money you'll spend on ruined t-shirts will quickly add up when you use these cheap frames.

I won't order these again. These couldn't be much worse. There is no way I'm putting these screens in the exposure unit. The corners and edges are all quite sharp, just asking to put a hole in the neoprene of the vacuum system. The edges are held down with foil tape? And a while roll of foil tape in the hox, what's that for. I think they are crappy, I guess I'm used to quality equipment.

These are not that great in quality. Very disappointed as the frames are very flimsy. We have to put two together just to use them.

I wish I could, I really did. I wish there where no problemes for cheaper tools.. but everything had its price. And if its to good to be true , it is…

Je n'ai pas reçu mon colis, il s'agit de la deuxième tentative de livraison. Je suis cliente de Vevor depuis longtemps et ces problèmes m'inquiètent.

About 18 months ago these were the best value screens you could get, tight mesh, with good welds and adhesive. They have since changed supplier I believe, and are now poorly made (have ordered 2 sets in the last year to confirm this wasn't a one off). They have far looser mesh of lower quality, poor welds on each corner so they are flimsy, with gaps so water can get in, weaker adhesive holding the mesh and even the metal frames themselves are much thinner and less sturdy. Would highly recommend just paying more somewhere else for screens that actually work properly.