Kundenbewertungen für VEVOR Propan Schmelzofen 4 KG, Gas Metall Schmelzofen Propan Ton Grafit Tiegel, Schmiedeofen für Edelmetall Schmelzpunkt 1350 °C, Ofenboden 20 mm, Schmelzzeit 10 min, 2,54 cm Keramikfaser feuerfest

Works very well dose leak propane around ports so when you put it together put high temp sealer on it other than that is awesome to have in the shop

Très bon rapport qualité prix

Très bon petit appareil qui fonctionne très bien qui consomme très peu de gaz satisfait de mon investissement

I did put refractory on the insulation before firing it. I bought the dual burner to make sure it could get the job done so it's first test was copper. If it can melt copper enough to pour easily. It can melt about anything. And it did. The 12k crucible in not a fan of. Which takes nothing away from the unit. It's just a massive, heavy crucible, that will be very intimidating if it's your first time. The thing will look like the sun. Wear very thick welding gloves and no exposed skin. I found an old welding helmet and took the dark plate out and left the clear. This is a major help when you stand over the opening to look in. It open it to pour. Just put sunglasses on under. Otherwise that 12k crucible is gonna feel like it's melting your face. I actually throttled back the propane and didn't need it full blast for a huge crucible and copper. So it will get the job done. I ended up buying a 2k crucible and a good firebrick to keep the smaller crucible up into the flame. Much better manageable deal that way. And melted faster. The 2 burner unit will go through propane. Kind of his without saying and common sense. 2 burners=twice the propane. It is nice you can shut one off while using the other. Or start out with one until everything nice and toasty. Then fire the other and off you go. The construction isn't bad. After all for the price you're not going to get 3/16 stainless steel unit. But overall gets the job done and so far so good.

Passt 👍

Whilst I have not used this product yet, other reviews I have read have advised to treat the inner insulating fabric prior to use. The information received with the product does not mention that treating the lining will enhance the life of the product. It would be nice to know if Vevor also recommend treating the lining with sodium silicate and fire cement?

detendeur et maneau ne fonctionne pas

I bought this unit because I had a lot of extra wire and everything else I was melting down and it worked great for that

Qualité prix imbattable , couvercle pas tout a fait étanche, fonctionne très bien, consommation de gaz raisonnable, faut plus des pinces pour sortir et manipuler le creuset...

Pretty good quality on this little furnace.