Kundenbewertungen für VEVOR 305mm Betonsäge Trennschneider Pflasterschneider Betonschneider 2800W

We used this saw to cut a 6" slab for a commercial restroom remodel. It was plenty powerful enough to cut through 6" of concrete. There is still plenty of life on the blade after cutting 100'. Great Value!

This product is surprisingly well made for the price. As stated in the description the motor is 3200 watts which draws 26 amp at full load but i was able to use it on a 20 amp circuit and take it easy on the cuts. I popped the 20 amp breaker a few times while cutting but it served it's purpose. I used it to cut 5 1/2\" thick concrete in my basement to add a new bathroom. It may work better if connected to a 30 amp circuit.

Has proven to be easy to assemble, durable and poeerful. Used it to cut an 8 inch wide, 10\" deep, 15 foot channel through a combination of concrete and granite. A lot of work, but it got the job done.

I purchased this saw so that I could install some rectangular drains in my master bath. Put the saw together, but haven't had the chance to use that saw yet. However, this saw is everything advertised and more.

fantastic value. Saw works very well, worth every penny. included water pump provides enough water to eliminate dust down & valve allows you to minimize excess water

This saw has been fantastic. Here's some pros... Cuts well and accurate, multi angle range is good. Cons... high amp draw requires direct outlet, use of extension cord blows 20amp breaker, vertical cutting very difficult and horizontal VERY exhausting. I can answer questions but takes me a while as I'm very busy. Overall this is and has been a good product that I would buy again.

Great price and very good. Used it a bunch and very happy with it. Ive used it to cut brick for my driveway and cap blocks and retaining wall blocks really cut alot of time off my projacts. Highly recomend it to all.

This concrete saw came complete with blade and water kit. Put the blade on got a 5 gallon bucket for the water and went to work. This is ideal for the home owner doing small projects around the house. We are installing a 40 x 14 patio using landscape blocks to hold up the patio and pavers for the patio surface, with tumble stone for steps. The saw worked fine day 1 and we are waiting for warmer weather to really use it. We will see how it does down the road.

I needed to cut my shop floor and pour thicker concrete for my 2 post car lift. I purchased this saw because it was about the same price of a rental saw. It cut 3-4 inch concrete with rebar no problem. The blade says Dry cut only, so I used it without the water pump. There was a ton of dust, use a respirator. I tried the water but it made such a watery mess, I couldn't follow my cut line, so back to dry cutting. The saw kept tripping my 20amp CB. Initial cut was about 2 inch, then a pass at 3.5 inch, then the full depth. It takes some time, but it worked great. It seemed to cut better when I pulled the saw back towards me when cutting. I recommend getting this saw if you need one. No issues with it at all.

I can't compare to other concrete sawsas i have never used any before but i know good quality when i see it. This thing cut through a concrete wall like butter. Had to make a door frame opening in my garage. Cut through the cinder blocks in minutes and tge blade is still great for many cuts to come.