Kundenbewertungen für VEVOR 2x Palettengabeln Anklemmbar 1090x70x230mm Gabelträger 907kg Tragfähigkeit Gabelzinken 109cm Gesamtlänge mit 76,2cm-Gabelblatt Gabelstapler Gabelstaplerzinken Frontlader Palettenrahmen

Nice bucket forks, would buy again. They are a good call value for the price. Nice price point to get yourself started

Solide verarbeitetes Produkt (Schweißnähte und Konstruktion) für den uneingeschränkten Gebrauch, unschlagbares Preis-Leistungs-Verhältnis.

Produit de fabrication solide (soudures et conception) à utiliser sans modération rapport qualité prix incomparable.

I feel the forks are useful but could use improvement. I would suggest a hex head on top of the hand clamp. This would enable easier and more secure contact to the bucket. The forks lift well but can work loose as you use them/

I bought these clamp on bucket forks specifically to use as brush forks for moving and stacking brush on a fence line clearing project and they have been a welcome, inexpensive labor saver for that. I considered the shorter four-tine type debris attachments but preferred these longer forks for the extra reach. By curling the bucket up/back, much of the weight rides closer to the bucket itself in kind of a cradle between the forks and a backstop that I made to fit in the provided upright slots. However, by using the backstop slots the reinforcing chain slots are not open for heavier flat-carry loads. Oh well, the bucket I'm using is fairly heavy duty and haven't noticed any bending so far under modest loads, and I plan to keep it that way. Also, having enough rear counterweight on the tractor is important for safety since the load is farther out front. My main complaints are that I'm having to re-tighten the clamps regularly (with a short piece of cheater pipe for enough leverage) and I'm concerned about the threads stripping out over time. Also, the forks will move out of alignment fairly easy if much side pressure is applied. The middle stabilizer bar does help somewhat to keep the forks aligned but the wing-nut set screws are dinky and also need periodic re-tightening. I did consider a set of dedicated quick-attach pallet forks but just wouldn't use them enough to justify the cost difference and actually need the extra forward reach that these forks provide. So, by keeping these clamp-ons tight, going slow and deliberate, and approaching the loads as straight-on as possible, I've been able to move/stack more brush for burning faster than my back could ever tolerate. Your needs may differ, good luck!

Works great for piles of branches, easy to scoop pile and take to burn pile and dump. easy to clamp forks on, they stay on well, have 2012 New Holland boomer 20 tractor. Was able to unload pallet with a 3.0L engine with the forks.

Only had a short time, but seem to work great. Will definitely help with moving tubs for cows. Easy to put on bucket and adjust.

These came in handy when we had material delivered to the farm. They will tend to losen after some use so keep a rubber mallet close by to tighten them back. The brace is great for setting the width, but I found it takes away from the depth when picking up pallets. I'm pleased with them for the occasional use.

Product as described. Functions well on my Deere 1023. Shipping / tracking was VERY BAD! It took longer than expected to arrive.

So far it seems to be working really good if it keeps working like this, I will raise my score to a 5 all the way across