Kundenbewertungen für VEVOR 2x Palettengabeln Anklemmbar 1090x70x230mm Gabelträger 907kg Tragfähigkeit Gabelzinken 109cm Gesamtlänge mit 76,2cm-Gabelblatt Gabelstapler Gabelstaplerzinken Frontlader Palettenrahmen

They are heavy duty for sure. Almost too heavy for my little tractor. The L bolts to tighten on the bucket are a pain. No matter how tight I turned them, they still managed to move. For the price they are a good deal, but I need a better way to attach them.

This 4,000 lb clamp-on pallet fork set from Vevor is a seriously heavy-duty addition to a tractor bucket, with one major caveat. The forks themselves are incredibly solid and built to handle heavy loads, but the stock securing hardware is frustrating. ​The L-bolts that come with the kit to secure the forks to the bucket just do not cut it. No matter how much hand strength you use, you can never get them tight enough to prevent the forks from shifting under a real load. ​To fix this, I completely ditched the stock L-bolts and ordered M20 × 2.5 × 140mm bolts from Grainger. The thread match is perfect. Now, I can just use my impact gun to crank them down securely. With that quick hardware upgrade, these forks hold perfectly tight, do not slip, and work exactly as they should. ​If you are willing to spend a few extra bucks on proper bolts to replace the stock L-bolts, this 4,000 lb set is an excellent value and a highly capable attachment for heavy lifting.

Buon prodotto,montaggio semplice

These are a lot easier to use than the 4 x 4‘s. I used to bolt onto my tractor bucket and if I use these on concrete picking up pallets, they would be great. But I use them in dirt and the tips on these forks point down and dig into the dirt when I lower my tractor bucket. Please reverse the angle on the tips so that it keeps me from digging into the dirt when I grab a load of brush. But again, thank you. It’s way better than the 4 x 4 post that I was putting on there.

Easy to set up, a little difficult to tighten down tightly. Moves pallets well

Very good value, excellent price and very useful, had to tighten them down several times because they were coming loose and I wish I would’ve got the shorter tines. Too long for the smaller skid loaders. That’s my own fault.

Handig en goed bruikbare hefvork voor achter of voor de trekker. Borgpennen zijn te lang. Constructie lijkt mij te licht voor 1000kg. Daar is de prijs ook naar. Voor incidenteel gebruik achter kleine trekker prima. Let op contragewicht

This tool is good for the price. Need to really tighten it down to be able to use it but again a good tool for the price. Works well for my applications.

Light weight, easy to handl, lifted 675kg on the end of the forks, no problem. Only thing that will need to be replaced are lower two hitch points, which would need something from to stop them from drifting from left to right. All and all very good investment.

Overall awesome product! Quick shipping, simple design, replaced wing screws with bolts easier to lock down so there's no play. just making sure the plates are in the right spot and to make sure they are clamped on the bucket good is the only tricky part.