Kundenbewertungen für VEVOR Rangierhilfe Anhänger, Anhängerwagen, 272 kg Stützlast, 42 & 56cm einstellbare Höhe, 47,3mm Kupplungskugel, 254 mm Vollgummireifen, zum Bewegen von Wohnmobil-Bootsanhängern

This is solid and well made. Two minor points prevented a 5 star rating. First, it was supposed to be dual height adjustable, but holes were drilled for only the lower height. That was easily solved by drilling 2 holes myself, with a bonus that I was able to locate them at the default height of my hitch. The second point may not affect most users, but it is a concern for me. This device assumes the trailer will be resting on its jack stand before pick up, and that stand will never be more than a few inches off the ground. But I use a (https://jack-e-up.com/) jack attachment, which depends on tongue weight to keep it in place. In my case, once the dolly takes the full tongue weight, the jack is released and may not remain in a position to support weight. This makes it a bit scary to keep the tongue weight centered over the wheels. If I let the weight shift towards the handle, the foot on the dolly will support it. But in the other direction, if I let the unbalance become larger than I can restrain, the trailer nose will fall all the way to the ground. Another safety foot on that side would prevent that problem (a problem caused only by the attachment I am using)

Works as intended. One mounting hole not aligned, had to drill out myself, ergo -1 star

Attention : la boule fait 50,8 donc trop gros pour nos model métrique. Ca a bloqué complètement mon attelage que j'ai du le démonter pour extraire la boule de VEVOR. J'ai acheté une boule sur Amazon en pas de vis M19 et maintenant ça marche sans soucis.

The unit only has one height instead of the 2 in the description.

bonne qualité de fabrication pas super facile à utiliser je n'ai pas réussi avec une visseuse !!!!!!

Good product. Does the job. But I use it with the Hitch ball tube on top of the pin as I need it higher to move my boat. It gets very wobbly but still works. I am going to try to buy a good steel drill bit to make my own hole for the height I need the pin at

A bit weak due to thin metal

Ça semble bien fait. Installé mais non utilisé encore. Le « User Manual » pourrait être plus explicite. Bon achat.

I wish the ball adjusted up and down, but otherwise it’s couldn’t and it works

2 inch supplied tow ball not great. Need a smaller 50 mm tow ball in fact. I bought one of those 50 mm but the shank threads alas do not match the jockey socket on the wheeler. Otherwise a well constructed and finished design with fast delivery.