Kundenbewertungen für VEVOR 20U Open Frame Netzwerk-Rack, 585 mm Tiefe, Wandmontage oder Stand-Server-Rack, 4-Pfosten-Konstruktion, mit belüfteten Regalen & Montagezubehör, für Netzwerk-IT-Geräte & AV-Ausrüstung

Top Qualität + leichte Montage

Ist gut verarbeitet. Kann ich nur empfehlen. Betreibe 3 Dell PowerEdge Server darin. Würde ich auch wieder kaufen!

Artigo de Qualidade ; Bem Embalado e ENVIO IMEDIATO via Transportadora c um Servico de Execelencia !!!! Recomendo a Todos

I use this for my 2 eco-worthy batteries for my solar setup. Easy to assemble, holds the two batteries which are insanely heavy with no problem, and rolls well. Plenty of rack nuts and screws, they align well, so I would say go for it if you need a small rack set-up.

Tout d'abord sur le rack en lui même, c'est bien fait, solide et facile à monter. Je voulais remercier le support Vevor, j'ai reçu le colis avec une plaque abîmée lors du transport et ils m'ont rapidement proposé une expédition d'une plaque de remplacement puis un remboursement de 20€ quand la logistique n'a finalement pas pu m'expédier la plaque de remplacement C'est sérieux

A little tedious to put together, but it's sturdy and handles a lot of weight (I have rack mount batteries in mine) and wheels nicely.

The written instructions are provide clear assembly guidance and there are extra fasteners included. The screws are machine style but the frame elements are pre-punched but not tapped, so you end up cutting your own threads when you drive in the screws. As such, you do need to be careful that you do not over-torque them or they will tear out and you need to be sure to start each screw in a perpendicular position. The rack portion uses cage nuts and a few extra are included in the kit as well. The frame holds its square shape under balanced loading, but be sure to install the corner gusset brackets in order to get the full strength. The finish is commensurate with the modest price point, there are thin areas on the paint and light scratches here and there. There are masonry wall mount lugs included, however, for stud mounting, you will need to use your own wall fasteners. Once fully assembled, which took me about 20 minutes, the alignment of parts is respectable. The shelves are cantilever style and the metal front rails are thick enough so that there is minimal and acceptable flex under load. There is plenty of room for cable routing. The screws drive with a #2 Phillips screwdriver. The included grounding jumper is a nice touch if you have an earthed backplane for mounting. My feeling is that I would not be comfortable loading this in wall mount form with a 10U compliment of server blades or UPS modules, but for a combination of patch panels, switches, routers, and a NAS unit or two, it seem up to that load capability.

I am really surprised by this rack, when put together very sturdy, not expected below a $200 rack of the same stature.... I actually have started using more Vevor products as of late, they seem to be pretty darn good at a good cost, they also ship quickly.

Goes together easily Holds my network gear. Shelves are sturdy enough.

Macht was es soll