Kundenbewertungen für VEVOR 20U Server-Rack mit offenem Rahmen, freistehender oder wandmontierter Netzwerk-Server-Rack, 4-Pfosten-AV-Rack mit Rollen, bietet Platz für Ihre gesamte Netzwerk-IT-Ausrüstung, AV-Ausrüstung

Great quality, easy assembly, sturdy workhorse, casters are great for my application. Can't vouch for wall mounting system, but it looks beefy enough to hold whatever you can throw at it. Only MINOR issue is that all the threaded holes for assembly weren't cleaned out after powder-coating, so you'll need to either re-tap them for a silky assembly, or just power through with a standard drill-driver, which worked just fine. Arrived with the front and back faces pre-assembled, and the 4 depth arms pre-assembled at the minimum 23" depth (where I left them-can't vouch for sturdiness at full extension, but all steel felt plenty thick and well built for purpose everywhere else). The casters roll and rotate super smooth, even after loading. Lid (or bottom) was thick/sturdy enough for tools and supplies when installed half hanging over the back edge during installation work. 10/10 recommend that technique, and 11/10 recommend the product when considering the great price. - home user, 1st rack build

Nice and sturdy rack. I like it very much.

Tukeva laiteteline, laadukas, lukittavat pyörät liikkuu helposti, tilaa paljon

Muy bueno y resistente, deejorncalidad de lo que esperaba

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

Gutes preisgünstiges Rack. Auch für größere Server geeignet.

Rack arrived quite fast and packaging was in good condition. Only problem was that assembly instructions were missing. Anyway, rack is quite easy to assemble, so instructions are not necessary. Also those can be downloaded from product page. About rack itself. Paint job is not best. There is scratched and other flaws in paint. Also paint is quite thin, so it scratches quite easily. Also, top cover does not cover whole rack when depth is increased. Top panel cover whole top only when rack is not expanded at all. Most problematic is that rack is little flimsy. Product page says that you can load up to 500lbs (226kg) of stuff to the rack.I have loaded some 120 kilograms of equipment to the rack, and wheel mountings are starting to bend. Also when moving rack around, it feels like it is going to collapse. I do not have needs to move it around. It might be that i remove wheels and keep it stationary. Conclusion is that rack is quite nice for it's price.

Goes together easily Holds my network gear. Shelves are sturdy enough.

Generell ist das Rack solide und relativ einfach zusammen zu bauen. Die Anleitung die beiliegt ist verständlich geschrieben und mit Bildern ausgestattet. Ich war von den Bildern her etwas skeptisch, ob die mitgelieferten Räder ein Gewicht von ein paar Servern aushalten, aber in echt wirken sie sehr solide und bisher gab es keine Probleme. Notfalls gibt es aber auch normale Standfüße mitgeliefert, die stattdessen angeschraubt werden können. Man sollte auf jeden Fall mit einem Alku Schrauber das Rack zusammenbauen, da die Schraublöcher ziemlich eng sind sodass viel Kraft aufgewendet werden muss, um die Schrauben vernünftig rein zu kriegen. Die mitgelieferten Fachböden sind auch ziemlich praktisch und wirken qualitativ auch gut.