Kundenbewertungen für VEVOR Elektrische Betonsäge, 230 mm, Hochleistungs-Kreissäge 2000 W, Schnitttiefe 89 mm, Nass-/Trocken-Scheibensäge mit Wasserrohr, Wasserpumpe, Sägeblatt, für Stein und Ziegel

The saw worked great. Not quite as powerfull as I was hopping but worked fine. After a couple of days, the trigger lock started getting stuck a bit. But otherwise works well.

The saw is great to work with and so far no issues with it. The included pump can overheat so turn it off when not using the saw or the valve is closed. If you are cutting pavers greater than 3.5 inches you will need to flip it but it still cut straight and clean. Overall it is great.

Der Nutzer hat keine schriftlichen Kommentare hinterlassen.

I have received it

Water valve showed up broken, didn't know until I went to use it(4 days later) and now I have to wait for somebody to decide if I will be getting a warranty part? Seems pretty silly

Did not manage to use it for my project, low power could not cut my concrete driveway.Also after running it for about 45 seconds consecutively, the inline breaker trips.

Sägeblatt hatte eine Unwucht! Reklamation ohne Ergebnis

Utilisée pour couper des dalles en grès cérame de 2 cm. Résultat décevant. Il faut insister et la dalle finit par casser. Je pense que le problème vient d'une lame de mauvaise qualité.

Heavy more than a gas one, horizontal wall cuts are a pain. The handle needs to wrap one side so you can hold it sideways. Popped breakers while cutting wet, but no problems with breakers while cutting dry. Have only done a limited amount of testing thus far. But if you have bigger jobs to do this saw inst for you. If it's small short cuts then it will do it but man is it heavy. The wheels and their mounts need to be removable. Only got in the way for most of my cutting. It will be a nice paper clip.

Miss leading product. It is advertised as 3200watt but on the side of the machine it says 1800 watt, 27amp, max 4200 watt. I did not expect it to come with a 14 gauge wire with a standard plug. Then I found in their Q&A that your suppose to throttle and make shallow cuts and give it breaks to cool down so you don’t melt the wire. Is that a joke? In Canada the cord/wire needs to be able to handle the max load. This thing isn’t even legal to sell, here. I never ended up using it, but if I did I would have had to buy a 30amp adapter because it kept blowing the breaker. I tried 4 different circuits, including dedicated ones where the saw was the only thing running. I made sure to throttle it and reduced my cut down to 1 inch and still couldn’t make any progress without tripping the beaker. The problem is that 15 amp circuit it rated for 1800 watts max, 1500 continuous, this thing pulls 1800 watts not even under load, before you even start making any cuts. Save yourself the trouble and rent, or if you have a grinder, buy a concrete blade and have someone use a hose to spray waters I drilled a hole in the guard of my grinder to feed the pumps hose that came with the saw, worked like a charm. Cut way faster than this would if you have to make 20 passes just to not blow the breaker or melt the cord. I intend to remove the 14guage wire and put a 10guage with the proper 30amp plug as this should have had.