Kundenbewertungen für VEVOR Kraftstofftrolley 60L Kraftstoffkanister Benzinkanister PE 460x533x930mm Gaskraftstofftankbehälter 7,8 L/min Max. Durchfluss Ersatzkanister Benzintank Geeignet für Diesel, Schmieröl, Benzin

This fuel caddy is the first Vevor product to disappoint us. We read the reviews that said to add a hose clamp when connecting the rubber hose to the valve, so we did. Leaking problem solved, NOT. Apparently the metal petcock valve threads are screwed in to plastic threads. Once it starts leaking, there is no way to tighten it. We have to store it laying down or all the fuel will leak out, but you have to stand it up to use the pump. Not a great design. We will attempt to use some form of thread lock type product after we have used the fuel in the caddy.

Gaskets and teflon tape provided dissolved in fuel, causing it to leak badly. Vevor was great about it and sent me new gaskets that seem to be of the correct material, however it really points to a poor design. The hose outlet should not be at the bottom of the tank. They could just as easily put it up high and have a hose reach the bottom from inside the tank. A leak where it is now makes a mess quickly and is potentially dangerous. The hand pump works ok, but there's no auto-shutoff so you need to be close enough to watch fuel level while pumping. When I finally get it to stop leaking, I'll probably just use as a transfer tank.

I havent really used it very much i filled it up twice since I got it the pump started grinding and eventually just locked up I have had to just pour the existing gas into another container.

I got this last summer and can't keep it from leaking. The bottom fitting is nothing more than a water hose valve. I can't leave it standing up or it leaks. 1st thing i did was buy better hose clamps which helped the pump leaks. It is nice for filling and transporting. I think the metal caddy would be better a better option for me. I just don't know about filling and moving it around.

Unable to get it to not leak where fill line connects to tank

Bought this to use for a coolant system. Wheels roll well on smooth surfaces, very easy to move around. Pump can output 50+psi surprisingly, but hose will burst around 50 psi. Hose is cheap, not nice fuel grade hose you'd buy from auto parts store. Also the outlet fitting off the pump was picky, had to use plumbers tape and just the right amount to torque to seal up (I have no idea if plumbers tape hold up against gasoline). tank feels solid, cap has decent looking vent in it too. Thought about actually buying one for fuel purposes after buying for work project.

This is maybe would be a great idea. The crank broke the first day I used it. Leaks when left in standing position. Save yourself headaches buy a 5 gallon gas can.

Do not plan on them holding gas unless you rework the valves, both caddies I received leaked where the valves went into the tanks, had to resell them and the valves to get it to hold gas. If you’re not handy at making repairs, do not buy these.

I was delayed in completing assembly because the hose clamps provided were of very poor quality, and after trying to snug the first one it failed. I purchase good quality clamps and completed assembly, but didn't purchase fuel until today to try it out. It is a good thing that it has the ball valve shutoff, because the lower hose connection is very rone to leaking at the hose to tank connection. The suction barb that threads to the ball valve is too short to accommodate 2 hose clamps to get a better seal (It would accommodate two of the provided clamps, but the would have failed on tightening). The hose connections at the pump suction and discharge sealed fine. I was able to slow down the leak, but was unable to stop it. Before next use I will try a paste sealant to see if that will help. I got the caddy for use with Diesel fuel, it would have been nice if it was available in yellow.

I usually am pleased with Ave or products but this caddy is a disappointment. I followed the assembly instructions and made sure all connections were very tight. When I started filling with gas, it leaked from the bottom connection. I disassembled and used more tape, checked the rubber gasket then reassembled. Still leaked. Upon closer inspection , the leak was not from the connections I made, but where the brass doohickey was attached to the caddy by the manufacturer. Not sure what to do at this point as it is unusable and will be a major pain in the butt to return due to its size and weight. Very disappointed and inconvenienced.