Kundenbewertungen für VEVOR Kraftstofftrolley 60L Kraftstoffkanister Benzinkanister PE 460x533x930mm Gaskraftstofftankbehälter 7,8 L/min Max. Durchfluss Ersatzkanister Benzintank Geeignet für Diesel, Schmieröl, Benzin

Bottom connection leaks no matter what I try. I store it laying down so only a problem while being used. The rest of the quality is great.

This is a well built gas can, but the hose does not fit the fittings used on the gas can. The hose is too large for the fittings and it causes gas to leak at the fittings where the hoses are connected. This would be an easy fix if Vevor vendor would just do it. If the seller of this gas can would read the comments they would know this and correct the issue why don’t they?

The hose from the tank to pump is too big. The pump takes forever to fill a tank

The hose clamps they send with it are very cheap and will not tighten enough to keep the hoses from leaking

Needed something to deliver fuel to boat on dock. 16 gallons, handy pump and plenty of hose, thought this would fit the bill. First the good; The overall design makes it easy to handle and store, full or empty. Almost has TOO much hose, can reach quite far. Easy to wheel around, very balanced with or without fuel with the ability to lie flat. Easy to fill when lying flat. Now the bad; Though the wheels are nice, could be a little taller and pneumatic to traverse gravel or bumps. And speaking of those wheels, they are attached by a press fit tube that comes loose very easily, needs sturdier fasteners. Unit came with everything needed to assemble, but plumber's tape kinda chinsy and hose clamps severely inadequate. Bought heavier duty ones to fix leak issues Valve from tank to pump could use little more clearance. All in all a decent product, just needs couple tweaks.

The volume of fluid removal was very disappointing....everything else was good except that.

It would be a great fuel caddy if the pump system were more user friendly and it didn't leak.

The hoses are oversized for the barbed fittings. Hose clamps are garbage had to replace with quality one over $10 spent. Teflon tape had to be replaced with gas rated teflon tape and over 6 wraps around to prevent threaded part of barbed fittings from leaking. Would take 15 to 20 wraps with provided teflon tape. After about $20 extra spent and $6 gas wasted I now have working correctly.

Product came well packaged. Assembly was easy, but parts don't fit very well and clamps are cheap. Hoses are 3/4 and fittings are 5/8. 1 unit a bought hoses won't sell with the clamps supply with parts. Other unit had to take apart because the rubber gasket was installed upside down. Will have to buy new clamps and hose.

Was going to use in boat. Filled and stored in garage. Fumes from container seeped through bottom of container while in garage and damaged garage floor coating. Garage constantly smelled of gasoline. No use to keep in boat as it smells like gasoline all the time.