Kundenbewertungen für VEVOR 6 Zoll leistungsstarker Präzisions-Spannschraubstock, Schraubstock Maschinenschraubstock Präzisions-Schraubstock-Zubehör-Set, 1-3/4 Zoll Backe Präzisions-Spannschloss Tischschraubstock

Der Hebel zum verstellen dürfte besser sein. Alles etwas unfertig

Bra maskinstikke til en så lav pris. Eneste ankepunkt er at det mangler stor skive under mutter for å skru fast stikke.

Very good vise for use both on my mill and on my drill press, it is tight, well made and very stable. This is a vise that works well for drilling, milling and general machine work.

Schon und gute Arbeit schnell geliefert sauber Sache würde ich wieder kaufen alles bestens Gut verpackt

Le poids respire la qualité, précis et à un bon prix. La finition est moyenne cependant, mais c'est pas le problème. Il manque des rainures dans les mors pour tenir des pièces rondes.

This is a pretty decent vise for a light weight milling machine or drill press. if you have a medium to larger machine, the castings are a little thin for agressive cutting. As compared to my Kurt, there is maybe 60% as much metal in the vise, which does translate to less strength. If you are using a standard bridgeport style mill the will probably be a solid choice. if you have a 7hp+ cnc, you may be able to break the vise with a heavy cut or at minimum experience some flexing that may cause trouble. In terms of dimensions, my example was well made and accurate enough for most things. Machining to +/- .001" per 6 inches is doable. Held parts square to about half that tolerance, which is ok. As with all tooling, you will need to invest time setting it up to be accurate. Wish it were made a little thicker, but it is a lot of vise for the price.

Works as intended. Vice is sturdy and is on my mill now for a few months haven't much to complain about.

Aan één kant was het sleufgat voor de bevestiging niet bruikbaar door een gietfout. Deze zat half dicht. Eerst open moeten frezen. Maar de klem is wel onwaarschijnlijk goedkoop dus dit soort missers in de kwaliteitscontrole moet ik maar voor lief nemen denk ik. Verder een prima klem. Ik heb hem al meerdere keren gebruikt voor freeswerk en zwaar boorwerk.

Der Nutzer hat keine schriftlichen Kommentare hinterlassen.

Mal, el mecanizado de las chavetas de centrado no está alineado con las mordazas en los 160mm de ancho está desalineada más de 1mm.. tengo que mecanizar la para poder usarla