Kundenbewertungen für VEVOR Mini-Metalldrehmaschine 8x14, Mini-Drehmaschine 2250 PRM mit variabler Geschwindigkeitsänderung, Präzisions-Mini-Drehmaschine 650 W, Metallbearbeitungsdrehmaschine, kleine Metalldrehmaschine, Fräsmaschine für verschiedene Arten von Metalldreharbeiten

Nice little machine, was well set up from the factory, I added a few perks as in the quick change toolpost and live center, also steel gear set. I spent a little time checking bolts , gib adjustments, cleaning, aligning center with the chuck. I must admit, everything was fairly close and machine runs quietly.

This lathe seems almost perfect out of the box. The carriage is tight, no play in anything, coated in a light oil, I just mopped up the excess and added way oil. Amazing value!

The only other lathe I have used was an armature lathe. That was back in the late 50s and early 60s. I got it cleaned up. Bolted down to my bench. My first cut was just okay. I tried some 5/8 round stock I had lying around. I was surprised how easy it was to turn it down to 1/2 inch. It came out as smooth as what you get from a machine shop, from a pro. I would recommend this to people who want to do small jobs. It does need to be bolted down, so no vibration is allowed.

After reading multiple reviews, I knew what I was getting into. Suprisingly the quality of the lathe wasn't as bad as some of the reviews I read. Still took it all apart clean, lubricated, shimmed and adjusted for proper movement. QTP is a must, in my opinion. Note that a lot of the gib screws are loose out of the box. The lathe is well packaged and arrived within 2 days of the purchase date.

I'm overall pleased with the machine, however it arrived damaged. My first impression was that it may have been a return because the power control circuit board was broken from its mount and the power wire was disconnected from the power switch, A fairly simple repair, and it has been working very well.

Excellent highly recommend

It is a nice handy machine, I love it

I got this for machining small parts for firearms that you cannot buy anymore and other parts. It's been useful for this use. The tool post holder is the weak link. It is of serious poor quality. I had a friend mill me a nice one. The indexing point for rotation is not square and cannot be squared so I remove the spring and lock post all together. It's easier to square it off that way. Otherwise a useful purchase for a small mildly powerful mini lathe.

Very good

Great for small jobs, Have done some small brass objects, but am still getting used to it. Theres a bit of backlash on the controls, but once its taken into account it seems fairly consistent so far. Looking forward to doing some thread turning which I've absolutely no experience of, It's been many many years since i 've done any turning so I'm back on a steep learning curve and enjoying it. Very satisfied with the product. Taper turning is limited, but not surprising in such a small lathe. Of course I'd prefer to have a bigger, fesature rich lathe , but can neither accommodate one in a limited space nor justify the cost.