Kundenbewertungen für VEVOR Metalldrehmaschine Mini-Drehbank Drechselbank Tischdrehbank 12-52 TPI für Metallbearbeitung Drehen Bohren, 3-Backenfutter 4-Wege-Werkzeughalter Notausschalter Drehzahl von 50-2500 U/min Einphasig

Bonjour Pour un premier tour métaux plutôt bien je pense que la marque vevor a tenu compte des commentaires sur certain petits problèmes est les a corrigé ça reste un tour abordable à un prix raisonnable avis perso

Pour l'instant je ne l'ai pas encore utilisé mais tout a l'air correcte , la livraison a été très rapide 3 jours comme prévu, produit très bien emballé dans une caisse en bois très résistante , maintenant reste a voir dans le temps Seul défaut une toute petite notice tout en anglais

Bin angenehm überrascht für den Preis doch ganz gute Maschine, auch Zubehör ist erhlätlich. Minus keine vernünftige Bedienungsanleitung weder in englisch noch in Deutsch. Versand erfolgt einer Holzkiste die Lieferzeit ist in Ordnung und auch der Service gibt rasch Antwort.

Top fonctionne parfaitement, il faut refaire le réglages des Jeux, après c'est top, fonctionnement précis est facile

This mini lathe has been a great addition to my shop. I’ve used it quite a bit and I’ve really enjoyed it. It’s not perfect. It’s not gonna be like a $10,000 machine, but it is functional for a small workshop plan on disassembling and cleaning and getting burrs off of all the pieces, but it can be tightened up. Unable to mill plastics, aluminum and steel with this unit it will take some practice to get used to it. Very good value for the money. packaged well they arrived with no damage.

I ordered on Friday and it arrived 1 day early on Wed. The crate was in great shape and the Lathe was undamaged. All the parts and accessories were as advertised (a rare thing now a days), I was expecting a lot more clean up and adjusting/tweaking from all the video's and forum posts online. Right of the box there was very little cleaning and adjusting needed. Tailstock was good, cross slide was adjusted properly and the only adjustment I made was to loosen the compound gib screws an 1/8 of a turn and then deburred the tool post a little. It's whole lot nicer than I was lead to believe it would be. I was up running and making chips in about 2 hours after UPS dropped off. Would I buy it again? Absolutely!

I love this little lathe. It is a benchtop lathe, so there is a definite limit to what can be accomplished with it. The passthrough of the chuck will limit the size of the material both in diameter and length, but it works really well on smaller projects (which is what it is designed for). I've done external and internal milling of material as well as some boring operations. Once I got everything aligned, which you will have to do upon initial setup, it has been great. I bought the set that included the metal gears. I have not installed the metal gears yet and have been using the installed plastic ones. When the operation gets a bit restricted, by depth or hardness of the material, I have found that the plastic gears will slip and grind. I plan on swapping in the metal gears soon. I have purchased other Vevor lathe tools to experiment with the various operations. I've turned mild steel round stock, tube steel, aluminum, hardened steel (very difficult with the plastic gears) and Delrin. I've found that it performs well on nearly everything that I've tried thus far. Their is a little movement in some of the parts and if you try to tighten it up too much, it restricts the movement of the tooling. Overall, I'm very happy with the purchase for my uses so far. I plan on installing the steel gears and my Vevor, 4 jaw chuck to play around with some other operations.

For someone who wants to rekindle his passion for wood/metal turning, this lathe is an excellent first step. From the size perspective, it will meet most of your hobby tasks or smaller items if needed to be fabricated around the house. Its swing of 7" (total diameter of a material you can use) is more than sufficient unless you are planning on doing some business doing bigger parts, at which point this would not suffice. You can literally start using it out of the box (or in this case, out of the crate). However, do not expect great accuracy at this moment. Some things I have experienced from the get go: 1. Whatever you turn will be off between the two ends of the material you are working on (taper). The longer the item (the maximum about 12 inches if you include the tail stock) the bigger the taper will be. I've seen some videos of people disassembling entire unit and re-assembling it to get the best tolerances they can, but if you spend this much time, effort, and in many cases fabrication of new parts, why don't you just buy a more expensive lathe that will come with those concerns addressed? Isn't it a wash in price? But that's just me. 2. The two points between the head stock and the tail stock have to be calibrated. Out of the box, it's really not there. 3. The cutters provided with the unit are more than adequate for the beginner. 4. The turret is also sufficient. So in my case, after about 5 days of light use (I mostly turn wood), the motor gave up. There was a puff, my breaker went off and that was it. After resetting the breaker and changing the fuse on the lathe, still no go. The motor is gone. So, I am invoking my 30 day return policy. I hope there is no issue because I plan on getting it again (if not a bit more expensive lathe for the reasons I mentioned above). I hope that Vevor comes through

This lathe has been a lot of fun to use. I am very happy with the operation. I will mostly be doing aluminum and brass but I found it works well with wood.

Good product but owners manual is not up to date with all features. Had a difficult time determining how to work movement of tread tool