Kundenbewertungen für VEVOR K72-125 Drehfutter 5 Zoll 4-Backen, Drehfutter unabhängige umkehrbare Backe, Metalldrehfutter Drehmaschinenzubehör, für Drehmaschinen

Chuck was easy to order and works well, is easy to adjust and has reversible jaws which helps a lot. Having a chuck is one thing but without a face plate it is pretty useless and Vevor do not sell faceplates for their chucks.Nor do they sell the internally threaded, weld in sleeves as supplied with the dividing head. This lack of depth causes many problems if one does not have an imperial screw cutting lathe. Surely it would not be beyond the wit and wisdom of a company the size of Vevor who proports to do such a good job of providing all the tools an engineer might need. Sadly they do not think that way so care should be taken when ordering to ensue you can get a spares backup!!

I haven't had much chance to use this chuck. I also purchased a Vevor 100mm dovetail chuck with wormscrew and that's my go to setup. I am really enjoying the dovetail chuck, I can use it for all the turning I do at this time.

You’d think when selling a chuck recommended for the lathe that it would have the same blot pattern. Or an adapter for a 3 bolt mini lathe flange. It does not. Horrible experience with this purchase (lathe was a fiasco) much less a chuck that doesn’t fit without a mod.

Purtroppo la descrizione mi ha portato inganno. Pensavo fosse autocentrante ed invece le quattro viti vanno regolate manualmente per ottenere la centratura

When I received this lathe and turned in on it was running without me turning the speed know. I got ahold of customer service and was told that it was within the limits of 50-1450 rpm even if it's running byl its self at 30 rpm. I told them that my first one didn't run by it's self nor any of the lathe that I saw on YouTube. So they wrote back and stated that it was set like that from that factory and there was nothing wrong. So I decided since they would fix it I bought a new motor and a board. When I installed the new board the old motor didn't run by it's self But it still didn't work right so I change the new motor and it runs fine. One thing else I noticed was the old motor was a 900 watt when In the description of this lathe it said it came with a 750 watt so I not sure if the board that came with the lathe is for a 750 watt Or 900 watt. After all of this it shows that vevor does not stand behind there Equipment and would rather feed you a line of bull instead of fixing The problem. So buyers beware.

Besteld bij de draaibank https://www.vevor.nl/metalen-draaibank-c_10121/mini-draaibank-metaal-220x750mm-mini-draaibank-voor-metaalbewerking-p_010598300757 als extra. Bij levering blijkt deze niet te passen op de draaibank (fout op site?). Ligt nu bij Vevor - benieuwd naar oplossing.

I purchased this for a vevor metal lathe( see that review) the Q&A for the lathe said this chuck would fit. $77.00 later, the chuck has 4 mounting bolts, the lathe spindle has three. Customer support ( if you can call it that) responds—— You will need an adaptor for it. ME: “ what is the part number of the adaptor?” CS: we do not currently offer an adapter. No offer of a return or refund!

Must fabricate things to be able to use it

Good quality. However, it does not fit the Vevor mini lathe. Original chuck has 3 mounting screws and this one has 4.

Me gusta probarlo primero y después hacer el comentario lo recogí ayer que la agencia de transporte fue muy ligera de casco y lo dejó a diez kilómetros de mi casa este es el primer comentario si luego se puede hacer otro del funcionamiento de la pieza de lo haré