Kundenbewertungen für VEVOR Fliesenschneider mit einer Gesamtschnittlänge von 1000mm, Schnittstärke 4-15mm Mindest. Schnittbreite 25mm Fliesenschneidmaschine inkl. Extra Schneidrad Fliesenverlegungs-& Renovierungsprojekten

Für gelegenliches schneiden der fliesen , mit reichlicher zeit wird der fliesenschneider reichen , das schneiderad ist leider etwas zu hoch für die fliesen , es hätte ruchig tiefer sein können .

For the price the quality is fine, but it does have some flaws that keep me from using it on a daily basis. 1. The piece that has to snap the tile after scoring can not be held up, so it’s always hanging in the way when cutting. That is quite annoying if you’re trying to cut precisely. 2. The laser attached is basically useless, since it doesn’t have enough options to calibrate it to be precise/usable. It can only be rotated, not moved from left to right. 3. Also the guide or “tile stop” is totally out of square, so basically unusable. 4. The ad claimed it has a carbide roller blade, but it doesn’t have it. So it dulls very quickly, had to buy a real carbide blade separately. A few minor tweaks could have made it way better, but they chose not to which is disappointing.

laser never worked. have not used yet to cut but i am sure will work just fine

Mais je n’est pas réussi à couper les carreaux sur la longueur ils cassent toujours à un endroit malgres la coupe faite bien droite. Dommage. Peut être mes carreaux qui ne convienne pas.

todo ok

Ich habe das Produkt gekauft um Fliesen im Format 20x120 zu schneiden. Das Gerät ist recht simpel in der Nutzung. Leider ist die Qualität nicht sonderlich gut. Der Anschlag ist etwas schräg montiert, sodass die Fliese nicht rechtwinklig angelegt werden kann. Der Laser lässt sich ebenfalls nur bedingt einstellen, sodass er entweder am Endanschlag oder am Anfang die Schnittstelle markiert. Zudem ist die Führungsschiene etwas schwach bemessen, sodass sich beim Anreißen in der Mitte der Fliese die Führung hochdrückt und der Riss nicht sauber ist. Für den angebotenen Preis im Bereich Hobby Gerät ist es okay. Der Support zu den angegebenen Problemen war leider sehr schlecht. Mir wurde 3x die Anleitung des Produktes geschickt, statt auf die Probleme einzugehen

La taglia mattonelle e perfetta per me ha solo un difetto quando tagli le mattonelle già da 2/3 cm sulla lunghezza di 120 non si riesce a tagliare si spezza sempre e in più si inarca molto al centro andrebbe studiato un rinforzo al centro

This was of some use for a while but it doesn’t cut accurately and the rails are weak and flex, look, you get what you pay for but I wouldn’t buy another one and ended up spending much more money on a descent tile cutter

I bought this to cut large format tiles, 24 x 48. I have several smaller cutters. The trend to larger tile sizes forced me to get a new bigger one. The packaging looks good on the outside. However when I set it up and started using it I quickly realized it was going to be a challenge to get the job done correctly. One of the biggest gripes I have is they didn't calibrate the tool. There maybe a laser mounted on the head but as is out of the box it's useless. You will need to adjust it. Then I put a tile in and scored it, pressing the snap bar separated the two halves. pull it out from the bed and how off square could it be? Try 1/8" per foot. That is ridiculous. The rails seem too thin for the length that they are. The car slides nicely. There are these wings on the sides to support tile overhang. They are flimsy are get in the way if you're not using them. The unit is put together with nylock bolts and screws. Put aside 3 hours to setup and calibrate. It's not ready to use as is out of the box. Would look elsewhere for a more robust accurate tool.

No me gustó