Kundenbewertungen für VEVOR 3 stage Handluftpumpe, 4500 psi Luftgewehrpumpe, 310Bar PCP-Pumpe 3 Stage Luftgewehr Lade Stirrup Handpumpe, Handbügelpumpe Dreistufige Steigbügelpumpe, Handluftpumpe Kompletter Zubehörsatz

Does the job perfectly. Just takes a lot of pumping.

Hyvä ja halpa

Werkt goed zolang je maar rustig blijft pompen. Neem je tijd, als je beneden bent, houd het dan een fractie van een seconde vast. Werkt dan makkelijk tot ongeveer 200 bar.👍

Todo perfecto

The review concerns the use of this pump for PCP air rifles. For other uses such as scuba tanks, etc., I have no opinion or experience. For those who might be wondering or hesitating to buy this pump because of its very low price, I’d like to assure you that it is fully capable of filling a PCP air rifle properly, even up to 4350 psi. That’s the maximum pressure of my rifle, and I’ve filled it many times over the past four months of use. The issues I’ll describe below can probably occur with any pump, even the more expensive ones. However, since this is the only pump I’ve ever owned, my comments refer solely to this model. First of all, it must be understood that filling a rifle to 3000–3500 psi is one thing, and filling it all the way to 4350 psi is another. Beyond 3500 psi things get much harder. I’m not referring just to the physical effort, endurance, and technique required, but to the fact that at these very high pressures the pump itself is put under a lot of strain. It therefore requires regular maintenance, as over time and depending on usage it starts to work less efficiently. Later, even basic maintenance—lubrication, cleaning, moisture oil filling, etc.—won’t be enough. You’ll need to start replacing O-rings, going deeper and deeper each time. Eventually, you’ll find yourself disassembling the pump completely, down to the last screw, replacing every single hidden O-ring. Even then, there comes a point when the pump once again refuses to work smoothly—or at all. At that stage, you keep trying different fixes, replacing more O-rings, cleaning again, and generally spending a lot of time—but the pump still won’t cooperate. After trying everything, I finally ordered extra spare parts from AliExpress, since the ones included in the original package were used up. Most importantly, I ordered two components that were not included in the original kit and which I had never replaced: the 3-stage pump copper piston head, and the one-way Foster valve. Although I had previously changed their springs and O-rings, I concluded that these two parts were likely responsible for the malfunction. After waiting 15 days and receiving the new parts, I installed them—and suddenly the pump started working again as good as new. I’ve filled my air rifle four times since then, and everything seems perfectly fine so far. In conclusion, this is an honest and capable pump that does its job well—but you must either know how or be willing to learn how to completely take it apart, as it’s quite sensitive and requires a lot of time and care. I would recommend not pushing it too hard, and if possible, avoid going beyond 3700–4000 psi, as that will extend the intervals between maintenance and repairs. Also, the two important spare parts I mentioned should definitely be included in the original package.

Great for my gas piston air rifle

I bought this VEVOR pump to use with my Diana Bandit air pistol, and it’s been working perfectly. It only takes a few pumps to get the pistol ready to fire, so charging is quick and doesn’t require much effort. Assembly was also straightforward — no complicated steps or extra tools needed, just a few minutes of setup and I was ready to go. Overall, a solid, reliable accessory that does exactly what it promises. Highly recommended for anyone with a similar air pistol looking for an easy, efficient pumping solution.

Habe die Pumpe für die Betankung eines PCP Gewehrs angeschafft. Die Pumpe kam zerlegt und ordentlich sortiert und gepolstert in einem Karton. Der Zusammenbau ging schnell und ohne Probleme. Neben Ersatzdichtungen war sogar Silikonöl beigefügt. Nun zur Pumpleistung: Zieldruck ist 200 Bar. Das initiale Befallen mit einer Handpumpe dauert natürlich, jedoch sind 200 Bar mit dieser Pumpe problemlos, in der Endphase mit etwas Kraftaufwand, möglich. Insgesamt ein sehr gutes Preis-Leistungsverhältnis.

Super

Good luck getting to 4500psi unless you weigh about 250lbs. Most were able to get to about 3500psi before it becomes too difficult. Pumped up a 50cc and 100cc bottles with some energy left over but the 700cc tank was wishful thinking.