High load capacity: Our strut compressor can support a weight of up to 1200 kg and is therefore better suited for removing shock absorber springs from various vehicle models such as motorcycles, cars, off-road vehicles, pickups, and SUVs. It can firmly compress even highly elastic springs and grip them securely without causing slight bending or deformation.
Adjustable safety brackets: The safety brackets can be adjusted from 8.6 to 12.2 inches to ensure a better fit for various sizes of coil springs. The threaded rods on both sides remain as parallel as possible during compression, with appropriate spacing. This coil spring compressor prevents spring rebound due to uneven tilting, resulting in a smoother and safer compression process.
Secure locking ring: A safety locking ring is attached to the jaw of the clamp, ensuring a firm and secure attachment to the spring without the possibility of easy loosening. This improvement increases safety and prevents any worrying moments during the compression process.
Increased hardness: The spring compressor is made of high-hardness #45 steel, which has been heat-treated to form a thick and integral structure, ensuring that the compressor is extremely resistant to deformation and breakage. Furthermore, the clamps have been forged and coated with a layer of corrosion-resistant nickel to prevent corrosion and rust.
Compatible with 3/4-inch sockets: The compression stroke is 11 inches / 280 mm. You can use a socket wrench to compress the hex bolt at the bottom of the threaded rod. Note: 1. Apply grease to the threaded rod before use. 2. Compress and release the spring alternately on both sides to maintain an even compression length. 3. Use both hands while compressing; impact wrenches are not recommended.
Your partner for safe and efficient spring assembly
Expand your spring-related tasks with the spring compressor tool set. Say goodbye to the hassle and dangers of traditional methods and enjoy the efficiency, safety, and convenience that our kit brings to your workplace.
Our spring compressor has a lifting capacity of 2646 pounds and a large compression range. It effortlessly removes springs from motorcycles, cars, trucks, SUVs, and other types of vehicles.
The clamping ring jaws ensure secure positioning, and the adjustable safety bars ensure even compression on both sides.
The components of our strut compressor are manufactured from heavy-duty #45 steel and each undergoes a rigorous heat treatment process. This results in increased hardness and strength, ensuring a reliable compressor.
Remember to compress and release the springs alternately from both sides to maintain a consistent compression length. Avoid using impact wrenches to prevent damage from improper handling.
Product guides and documents
User manual-de (PDF)Review
Questions and Answers
(0)
Typical questions asked about products: Is the product durable? ...