12V 140A Dual Battery Insulator
Durable, IP65 water resistant, and highly compatible
A voltage-sensitive relay (VSR) ensures that your vehicle with two batteries will always start. The VEVOR voltage-sensitive relay is wear-resistant, reliable, and safe to operate. To allow you to begin installation immediately upon receiving the package, we have carefully prepared a complete set of installation accessories. Instructions for the correct and precise installation of our isolator are also included. Suitable for various vehicle models: most cars, motorhomes, trucks, caravans, ships, boats, yachts, etc. VEVOR – we have the right solution for you.
- 12V dual battery separation system
- Everything needed for installation is included.
- Durable & long-lasting
- Weatherproof & reliable
- High compatibility
Start the installation right away!
We have provided all the necessary accessories for installation, including screws, cable ties, etc., so you can start installing our disconnect relay on your vehicle as soon as you receive the package.
3-wire connection
They can be used with a simple 3-wire connection to the battery. The connection can be made using the existing wiring in the vehicle and does not require an alternator or ignition.
Optimal protection with IP65
With IP65 water protection rating, it offers protection against dust, rain, vibrations, etc. Ensures optimal use of the automatic battery disconnect relay.
Silicone-sealed inside
The inside of the automatic battery disconnect relay is sealed with silicone. This provides more effective protection for the system and ensures vibration damping. The plastic housing is impact-resistant, wear-resistant, and robust.
Heavy-duty battery cable
The battery cable of our insulator is made from a pure, flame-retardant copper core and can be used for extended periods. Length: 5 m.
Always ready to go with us!
Thanks to its high compatibility, the VEVOR 12V dual battery isolator can be installed in various vehicle models. Suitable for off-road vehicles, motorhomes, caravans, recreational vehicles, boats, yachts, etc.
- 1 x relay for split charging
- 1 x 5 m red battery cable 110 A
- 1 x 1 m black ground cable 110 A
- 1 x Negative Marine Battery Clamp
- 1 x Positive Marine Battery Clamp
- 2 x fuse holders
- 3 x cable lug connectors
- 3 x Insulated blue ring terminals
- 15 x cable ties
- 2 x 250 mm red 110 A cable
- 2 x heat shrink tubing
- 1 x drill bit
- 1 x Black split cable conduit
- 1 x screw set
- Model: JDQTJ-5M
- Nominal voltage: 12 V DC
- Continuous current: 140 A
- Intermittent current: 160 A
- Switch-on voltage: 13.3 V
- Cut-off voltage: 12.8 V
- IP rating: IP65
- Material: Nylon plastic
- Current consumption - charging: 280 mA
- Current consumption - standby: 8 mA
- Bolts: M6 stainless steel
- Delay time: 5 seconds
- Switch-off delay: Approximately 5-10 seconds
- Operating temperature range: -22 to 221 °F / -30 to 105 °C
- Dimensions (L x W x H): 2.66 x 2.11 x 2.66 inches / 6.76 x 5.36 x 6.76 cm
- Net weight: 4.14 lbs / 1.88 kg