12V 140A relay set for split charging
Complete accessories, weather resistance, and intelligent charging
With the VEVOR dual battery disconnect switch set, you can start your vehicle using a separate battery. This keeps the main battery charged, ensuring your vehicle is always ready to start. We offer all the necessary accessories for a complete installation. The VEVOR split-charge relay set fits most cars, motorhomes, trucks, caravans, ships, boats, yachts, etc. Optimally charge your vehicle with VEVOR and be prepared for any eventuality.
- Dual battery disconnect switch
- Easy to install
- Robust & durable
- Excellent IP65 water protection
- Suitable for various vehicles
All accessories included!
The split charger relay kit comes with all the parts you need for a complete installation, including screws, cable ties, etc.
Easy to connect
No connection to the alternator or ignition is required. A simple 3-wire connection to the battery can be used with the existing wiring in the vehicle.
IP65 protection rating
The IP65 protection rating ensures that the split charger can be used optimally and remains protected from dust, rain, vibrations, etc.
High-quality inner layer
The silicone-sealed inner layer is safer and has vibration-damping properties. The plastic shell has high impact resistance.
Reinforced battery cable
The battery cable uses a pure flame-retardant copper core and can be used for a long time. Length: 2 m.
Wide compatibility
The 12V split charge relay is ideal for installation in ATVs, UTVs, trucks, RVs and camping applications.
- 1 x relay for split charges
- 1 x 2 m red battery cable 110 A
- 1 x 1 m black ground cable 110 A
- 1 x Negative Marine Battery Clamp
- 1 x Positive Marine Battery Clamp
- 2 x fuse holders
- 3 x cable lug connectors
- 3 x Insulated blue ring terminals
- 15 x cable ties
- 2 x 250 mm red 110 A cable
- 2 x heat shrink tubing
- 1 x drill bit
- 1 x Black split cable conduit
- 1 x screw set
- Model: JDQTJ-2M
- Nominal voltage: 12 V DC
- Continuous current: 140 A
- Intermittent current: 160 A
- Switch-on voltage: 13.3 V
- Cut-off voltage: 12.8 V
- IP rating: IP65
- Material: Nylon plastic
- Current consumption - Charging: 280 mA
- Current consumption - standby: 8 mA
- Bolts: M6 stainless steel
- Delay time: 5 seconds
- Switch-off delay: Approximately 5-10 seconds
- Operating temperature range: -22 to 221 °F / -30 to 105 °C
- Dimensions (L x W x H): 2.66 x 2.11 x 2.66 inches / 6.76 x 5.36 x 6.76 cm
- Net weight: 4.14 lbs / 1.88 kg