12 V 140 A voltage sensitive relay (VSR)
Reinforced cable & IP65 water protection & high impact resistance
The VEVOR voltage-sensitive relay (VSR) ensures you can always start your vehicle with two batteries. We've included all the necessary accessories for installation, so you can begin as soon as you receive the package. Suitable for various vehicle models, including most cars, motorhomes, trucks, caravans, ships, boats, yachts, and more. See for yourself! VEVOR – always ready to start with us.
- Two battery disconnect switches
- Easy installation
- Shockproof & dustproof
- IP65 waterproof
- Compatible with various vehicle models
Complete accessories for installation
All parts required for a complete installation, including screws, cable ties, etc., are included in the package of the split charger relay kit. This allows you to begin installation immediately upon receipt of the delivery.
3-wire connection
They can be used with a simple 3-wire connection to the battery. The connection can be made using the existing wiring in the vehicle and does not require an alternator or ignition.
IP65 protection rating
The IP65 protection rating ensures that the split charger can be used optimally and remains protected from dust, rain, vibrations, etc.
High-quality interior design
The sealed silicone interior is safer and has vibration-damping properties. The plastic housing offers high impact resistance.
Heavy-duty battery cable
The battery cable of our insulator is made from a pure, flame-retardant copper core and can be used for extended periods. Length: 5 m.
Wide compatibility
The 12V split charge relay is ideal for installation in ATVs, UTVs, trucks, RVs and camping applications.
- 1 x relay for split charging
- 1 x 6 m red battery cable 110 A
- 1 x 1 m black ground cable 110 A
- 1 x Negative Marine Battery Clamp
- 1 x Positive Marine Battery Clamp
- 2 x fuse holders
- 3 x cable lug connectors
- 3 x Insulated blue ring terminals
- 15 x cable ties
- 2 x 250 mm red 110 A cable
- 2 x heat shrink tubing
- 1 x drill bit
- 1 x Black split cable conduit
- 1 x screw set
- Model: JDQTJ-6M
- Nominal voltage: 12 V DC
- Continuous current: 140 A
- Intermittent current: 160 A
- Switch-on voltage: 13.3 V
- Cut-off voltage: 12.8 V
- IP rating: IP65
- Material: Nylon plastic
- Current consumption - charging: 280 mA
- Current consumption - standby: 8 mA
- Bolts: M6 stainless steel
- Delay time: 5 seconds
- Switch-off delay: Approximately 5-10 seconds
- Operating temperature range: -22 to 221 °F / -30 to 105 °C
- Dimensions (L x W x H): 2.66 x 2.11 x 2.66 inches / 6.76 x 5.36 x 6.76 cm
- Net weight: 4.14 lbs / 1.88 kg