- Home /
- 18" X 18" Silk Screen 45cm X 45cm Printing Flash Dryer Adjustable Stand T-Shirt Curing
This is a professionally built brand new flash dryer. It has a 18x18" heating grid opening, wheels, and a standard 110v or 220V plug so there is no special wiring required. This unit can be raised or lowered from 30" to 48". It is very heavy duty. The temperature is over 400 degrees F at distance of 2 1/2" below the flash heating element. It can easily cure plastisol ink for silkscreen printing.
The unit is ultra heavy. It has a base diameter that is reasonable (about 38"). It can easily roll thru standard 32" door way. We have a Ranar flash dryer. It is only about 2/3 the weight. It is much lighter so its base has to have a big diameter (over 50") to prevent it from tipping over. (see photo above ) This create quite a bit of inconvenience because we keep on tripping or kicking the Ranar flash unit while we are working on silk screen printing. This flash dryer base is compact and it will not tip over because it is heavy.
Special Note: This item takes approximately 5 minutes from initial turn on to stabilize temperature. There will be natural fluctuations in the temperature as you use the item.
1.Adjustable height floor stand from 30" to 48"
2.Double Boxed for secure and rigid packaging
3.Basic assembly tools included
4.Shrink wrapped parts in shipping box for safety in transit
5.Styrofoam padded on all sides and internally secured
6.On/Off Switch, No Timer
7.Heavy Duty Steel Bearing Castors
8.Black Powder Coated Steel Welded Frame
9.Secure Handle for Moving the Dryer in production
1.Heating Area: 18" x 18"
2.Base Dimensions: 38" x 38"
3.Top Dimensions: 29" x 19"
4.Input Power: 110V/60Hz or 220V/50Hz
5. Max Temp: 200 degrees Celsius
6.Suggest Temp Range: 140-180 degrees Celsius
7.Average Current Draw: 13 Amps
8.Maximum Current Draw: 16.5 Amps
9.Average Power Usage: 1350 Watts
10.Maximum Power Usage: 2000 Watts
11.Minimum Height: 30"
12.Maximum Height: 48"
13. Shipped Weight: 53 lbs
14.Assembled Dimensions: 38" x 38" x 48"
1.1 X Head
2.4 X Base Leg
3.1 X Below Support Bar
4.1 X Top Support Bar
5.4 X Caster
6.2 X Handle
7.8 X Screw For Base Legs
8.1 X Base Leg Support Plate